Comments:

These flares are a nice. Installed on 2003 Chevy Silverado. Fit was perfect and install was easy. A great product at a fair price.

Comments:

Starting the overland build on my 2021 ranger Rack came with several mounting options. It's super sturdy I've put weight to it and I've traveled across the country with it. Going to be the start of something great

Comments:

I received the rack within the shipping time stated and it was well packed with no damage to box or parts. I installed it on a 99 Ford F-250 and it fits well. I used it this past weekend to carry kayaks on top during an off-road trip. The rack held up great and did not move at all. It has plenty of mounting locations to add accessories. Overall I’m very happy with the rack and would recommend it.

Comments:

Great product and rather simple installation. I would suggest using push-nuts on the front and purchasing the tool. Sexy and solid. However, start installing the bolts from the rear and work your way forward, leaving all of them loose until theat are all in place. We haven't seen a bunch of these but VERY happy with the product.

Comments:

Nice design, easy to install. Only criticisms are: 1) It could use an end plate near the cab to close that void, & 2) If I open my soft top, the light bracket is under the frame for the top. I will now have to custom make a bracket to install my lights, behind the top bar, so my to can still open.

Comments:

Nice made and looks good on the vehicle. The instructions are not very clear on getting to some of the fasteners to remove some of the factory mounted brackets and does not have any steps or information of what is the best option of what to do with the inner fender liners after the bumper is mounted. I would recommend the optional skid plate to give the bumper a finished look.

Comments:

Running boards arrived, nicely packaged, brackets and boards packaged color coded according to driver side vs passenger side. All necessary hardware was provided. Can only describe the process of the install as totally profanity-free piece of cake easy peasy. Took my sweet time which was maybe 1.5 hours once all the torquing was completed by hand. Didn't use any lifts at all just placed a yoga mat in the driveway and did the rest working from a prone position.

Comments:

(Tyger product, purchased on Amazon) After being very impressed with Tyger’s vented steel fenders for my Jeep JK8, I bought this stubby bumper. Once again, I am thoroughly impressed. The finish is immaculate with no thin spots or distortions (something I liked about their fenders). The welds are solid, and yet smooth and undistinguishable. The recessed winch plate was perfect for my 13.5k winch and I love the tabs on the bar for attaching my light bar. The stubby width is perfect, protecting what needs protecting while not interfering with my tires for an approach when off-roading! Wish I could attach a picture. It looks great, and I get asked about it a lot. Oh, the Tyger logo looks laser cut into the bumper and I attached rock lights on the backside so it really looks good lit up at night!

Comments:

These looks awesome! These are solid and sturdy running boards. They tuck nicely up to the cab and don’t stick out too much. Install was simple.

Comments:

This thing is legit… love it. No more noisy rack on the roof and I can keep my cargo box up there now.

Comments:

I installed Tyger Fury Bumpers both front and rear. I like the look of the truck with these bumpers. I chose Tyger because they provided a description of their powder coating system that is a quality process and back it up with a 5 year warrantee. The rear bumper is easy to install and fits the body lines of the truck very well. I would recommend this product to anybody looking for after market bumpers for their Ram.

Comments:

I included the skid plate in my bumper install. It fit well and was easy to install. It gives the front a more finished look. I was impressed with the finish quality as I was with the bumpers. I recommend this product for your Ram Truck

Comments:

I purchased both front and rear Tyger Fury bumpers for my 2017 Ram 1500 and I am very pleased with their product and their customer service. I needed replacement top cover plates and Tyger shipped them out quickly. I think they fit well and they look good. I chose Tyger because of the described process for finishing the bumpers. The quality of the finish looks good. There 5 year warrantee, which includes the finish, is the best that I found in their price range. I would recommend this product to anyone who is considering after market bumpers for the Ram.

Comments:

Only want 1 not2

Comments:

I bought mine off of Amazon but sold by Tyger. Excellent bumper for the price. The powder coat is well applied and thick. No light spots at all. Welds are done very evenly and look sunk well. Fit was right on and no cutting or adjustment had to be made to my 2021 Overland Gladiator. Nice thick steel and the winch plate is welded strong and plating is thick to support a heavy duty winch. Very pleased with my purchase.

Comments:

Well packaged, arrived undamaged. Easier install than expected, assembled and install by my self in about two hours. Added a 30" light bar. The bed bar adds a more stout look to the Gladiator. This is the second Tyger addition, also have the front bumper guard. Well manufactured products that hold up on or off road.

Comments:

I love this bumper and it was fairly easy to put on. It will take at least two people, and I would recommend watching a video before you install. I do have a question and was hoping someone could answer. When I took off my JL bumper, I also took off my fog lights. Can I reuse these on the new bumper? The instructions said you can't reuse them, but what is the next option? It would be nice if I could reuse them. I know you can reuse them on the smaller bumper.

Comments:

Good news, it fits the new (“re-designed”) 2022Frontier crew cab 5 foot bed!

Comments:

I got the bumper from dealer not direct I wanted to let them know that item looks really nice heavy built not Super easy to get it in but not impossible hope it holds against weather

Comments:

Brand new and bent and broke threaded eye bolt on rear latch.

Comments:

I recently bought the tri-fold tonneau cover for my 05 tacoma and the cover is great. Install was easy and the fit was tight. Lots of rain and wind lately with no issues. Solid and well made.

Comments:

Just received my order 10/29/21, Installed , these are better than i thought they would be! Had Star Armor on my last truck but they were not available for my new truck so i went with Tyger Rider. Nice fit , same finish , very solid !

Comments:

It was really easy to put together, sturdy and looks really good on my 21 ram 2500

Comments:

Thank you for quality parts. Nicely coated steel. Made in the USA. And it fits great. Install was easy. Directions were great. I also have the matching running boards and bull bar. Turns my 2018 Ram Crew Cab into a sporty beast with my MDS deleted Ram Air Hemi. Anyway thanks for the quality parts.

Comments:

I installed the sport bar yesterday. Good solid product and looks great. My only issues are the directions we're not clear. Extremely frustrating at times. If they would put d or p stickers on the pieces it would be a huge help. My main issue is with the length of the rack on the bed of my Jeep. It says it's capable with a t3 tonneau cover which I guess is technically true but it can only open the very end. The sport bar comes too far back to get it to fold twice. The pictures listed in the description although are not a Jeep show that it could be folded twice. Now I can't use a bigger percentage of my bed.

Comments:

This is my second set of Tyger Risers. First set was on my 2016 Ram 1500 Quad Cab. These are very simple to install, my 11 year old daughter did most of the install. I like the looks and design, simple and unintrusive. On a side note the 12" drop for the cab floor makes it easier for my wife and daughter to get in the truck

Comments:

These fender flares were my first introduction to Tyger products. I ordered the set (front and rear) from Amazon following a search there. I could not be more pleased! These are rugged, sturdy, and stylish. I get asked all the time about them from fellow Jeep club members. I wish we could include pics with our reviews, as I did on Amazon. If you are shopping for new fenders and have t heard of Tyger, go ahead and pull the trigger! These are bad a$$!

Comments:

Our 2021 Tacoma is much higher than the 1995 Nissan pickup it replaced. At 6'3" I have no trouble climbing in, but my somewhat shorter (and stunningly beautiful) wife is having a different experience. These rails from Tyger are a great solution. Easy to install, look great, and of solid construction. Brackets fit perfectly in the mounting holes built in by Toyota so all I needed was a ratchet and socket. The product arrived in a masterfully packed box with each component protected. Someone in Tyger's shipping department deserves a big raise. Check the Amazon product listing for a picture of my truck.

Comments:

Easy to install and looks great. Be patient when aligning and a second pair of hands helps.

Comments:

I got in a accident this morning and I have the Tyger side bars. I stand behind this product cause if I didn’t have these on the damages to my truck could of been worse. The side bar got a little messed up but it could of been worse. Love these bars.

Comments:

Love the Look. Combined with TYGER Rider running boards and hitch armor it gives the truck a good look.

Comments:

I just finished installing the hitch receiver on my 2021 RAM 1500 Classic Warlock. The install was very easy I had it on and in place in less than 15 minutes. One thing I would recommend is to make sure you have a torque wrench. It will make life alot easier. The Tyger hitch receiver is very well made and extremely sturdy. I highly recommended this item.

Comments:

Perfect fit. Looks great on the truck. Easy install

Comments:

I got the bull bar for my 2010 Dodge Ram TRX4 and it fits great and looks great too.

Comments:

These Running boards are great! I am glad I choose Tyger Running boards after doing a fair amount of research. Very easy to install with just a couple of tools. Rugged looking and well build. Would highly recommend these running boards. The look fantastic on my Trail Boss and my wife is happy, because she cant get up into the truck a lot easier.

Comments:

Couldn’t have been easier to put on. Was able to do the install all by myself with no problem at all.

Comments:

This review is more about the installation and initial quality. The initial quality seems to be really awesome, but time will tell with the overall quality. The instructions specific to this install were very detailed, A+. There were a couple of very minor details that may have been overlooked or just never noticed and published. The first was installing the "Bolt Plates" in the factory trail rail system. The first "Bolt Plate" (closest to the tailgate) was not able to make it past one of the mounting bolts for the rail system. The fix was easy. Just remove the bolt from the rail system until the Sport Bar is positioned. Then replace the rail bolt before tightening the Sport Bar bolt. The second was the last "Bolt Plate" (closest to cab). The position of this plate is in the opening of the rail system so I'm not quite sure how strong this plate is since there's really not much, if any rail for it to grab.

Comments:

I purchased one of these last year for my Dodge Ram. I liked it so much that I just purchased another one for my new Jeep Gladiator. Very well made product and easy to install using the instructions provided.

Comments:

i am pleased with the STEP BARS overall. i received them and the packaging was impeccably done. All parts are packaged with care as well as easy to decipher. The thought process in preparation shows! I was impressed with the shipping time. I like the design and they look better on my truck! The installation was was simple and reading (scanning) the instructions makes it easier. Who ever prepared the instructions made it very easy to understand and install. I suggest you gather all tools needed and items that are needed to prevent from having to get up to many times. Remember do not TIGHTEN bolts until you have hand tightened all bolts and adjusted the step bar to your satisfaction. Make sure the step bar is level/straight prior to tightening. Most importantly, make sure all BOLTS are secure/tightened! Adjust the brackets and step bar carefully prior to securing the bolts on ALL parts. Did I mention that the STEP BARS are easy to install! They also look better ON! Enjoy and step on up.

Comments:

Easy to assemble and hooked up easily to the Carlogic crossbars on my 16 Jeep Renegade Limited. Looks nice up there.

Comments:

Fit well and a lot cheaper than the competiton

Comments:

I would give this 5 stars if it weren’t for 1 minor flaw. I purchased this because of the extra security features with the hitch lock and also the bike lock. However there is one flaw here, while the bottom of rack is secure with the hitch lock, and your bike is secured to rack with the bike lock, one can still walk away with your bike and upper rack with just a wrench. Easily a 5 star rack if it weren’t for that minor flaw. All that aside, Holds my bikes without much wobble at all. In fact for the price of $109 I don’t think any others are better.

Comments:

Quality is very good! Easy to install and perfect bed cover.

Comments:

this is my first purchase that I make in Tyger auto and at the beginning I had doubts about the real quality, but when I saw the product wow is amazing, this product is perfect, elegant and strong, look grate in my RAM 1500, I will definitely recommend it to my friends

Comments:

2 1/2 years, 60,000 miles not a complaint. Still look as good as the day I put them on. Winters in the North East aren't kind. I wouldn't hesitate to buy them again.

Comments:

Awesome! Super Easy!

Comments:

Solid product. Fit nicely in the railing of my 2018 Tacoma. The cover grabbed right onto it. No complaints

Comments:

Packaged well. Easy installation. They look great!

Comments:

1st impression: great packaging. The bumper shipped quickly. Installation was easy. I added a winch at installation, and I used it within days. The bumper does it's job!

Comments:

Bought these a few weeks ago; simple to install on the Ram pickups. I installed them on my Ram 1500 Rebel which give the truck a more aggressive touch. Thanks Tygerauto!!

Comments:

The under seat storage box fits perfect in my 2020 Silverado. It feels sturdy and looks good. Only took about 20-30 minutes to install. I’m very happy with it.

Comments:

Great steps. Installed on 2020 Ram power Wagon. Easy to install. No drilling. Sturdy and well engineered. Glad we found Tyger.

Comments:

Perfect fit on my 2013 Silverado crew cab short bed. Installation was about 15 minutes. Great fit and adds great appearance.

Comments:

If you are looking for a quality cover at a reasonable price you have found it. It was easy to install and fits perfectly.

Comments:

These side rails are perfect for my 4 Runner!! No more door dings for sure and I love they are almost flush with the frame. Took ten minutes to install!!

Comments:

My wife got me these running boards for Christmas as I just got my new 2020 Canyon and it is my baby, These look great on the truck and was super easy to install. This is my second Tyger product I have used on my truck and will definitely be getting more, Their quality is great and the helpful install videos make it super easy.

Comments:

This cover fits my 2020 Canyon perfect. I did not need to use the sealing strip as it fit perfect and no water gets into the bed. Get product!

Comments:

First off, I cannot say enough good things about the way these were packaged. Between the heavy gauge carton, and the generous use of foam and bubble wrapping, nothing less than an airport baggage-handler on steroids was going to hurt these steps. I was replacing the factory rails on my ZR2, and these are heavier gauge, I think better looking, and I can step up on them. I'm in my late 70's, and with the use of some jack-stands and a floor jack I did the swap-out by myself. The tygers use 3 mounts instead of 4 (because they are beefier) and the same 8.8 bolts. Compared to the originals, the mounting tabs face to the rear instead of the front of the truck (just so you know) and they don't need/use the shim plates the factory rails did. Bottom line, I think I made a great choice.

Comments:

The K7 is an amazing everyday carry knife. It’s lightweight, the blade is super sharp out of the box and it has a glass breaker just in case. The packaging is some of the best I’ve seen in a long time for a knife. I can see this knife becoming one of my most frequently used.

Comments:

Added these nerf bars on my truck today. Installation was simple, the bars and brackets are high quality, and I couldn't be happier with the purchase.

Comments:

Great bumper, too easy to install, excellent configuration for the led lights.

Comments:

I bought this hitch and had it installed in 15 minutes on my 2020 Jeep Wrangler Willys edition jl 4 door. It looks amazing and made really well from what I can tell. I am really happy with the product I did t have to remove anything or alter anything g to for the hitch. I love it!!

Comments:

I just installed this cover so this is just an initial review. The T1 Soft Roll Up Cover seems to be well made. After watching a few videos, installation was easy and quick. Perfect fit on my truck. JMHO, it looks great on my truck. I believe it will do the job that I expect it to. Time will tell on how well it holds up, but I'm hoping to get 5+ years out of it.

Comments:

These running boards were really easy to install. Took maybe 20 mins by myself. Sold too and they look great!

Comments:

Thanks! I really like the new edition to the Gladiator come check out my video on YouTube after I installed them looks great! and functional. Video link below. https://youtu.be/n-ywF4-J8Mg

Comments:

Bumper shipped fast, excellent packaging. Heavy duty bumper, everything matched up perfectly once I had stock bumper removed. Looks great, very pleased!

Comments:

Easy to install. Did it by myself in about 30 minutes. Wife loves them, new she can easily get into her Gladiator.

Comments:

Got this to protect the back of my new 2020 Jeep Gladiator. Easy install, beefy bumper will not only help me step up to the back, but should protect from cars hitting the bumper in the parking lot!

Comments:

Nice looking product right out of the box. Harness snapped right into place along the way. Suggest taping the nut/washer to your 3/4" open-end wrench to get it behind the bumper and insert bolt from muffler side. Once it's hand threaded, move onto the next before you tighten any of them. Gap that people mention closes in once you tighten down. One of the better hitches I've installed.

Comments:

Bought and installed this a couple months ago. When i opened the box i was a little intimidated by how many parts but proved to be quite a simple install, even by myself. Looks great!!!

Comments:

Took about 30 mins to install alone. Really helps with the outside appearance of my 2011 Tundra truck. Didn’t want to break the bank on a cover and this was perfect. Had this for about 3 months now and holding up great.

Comments:

I can not say enough about this rear bumper .This is a heavy duty bumper the powder coating is fantastic , the fit is perfect .the license plate bracket is really nice even comes with the light . This bumper comes with everything , The price is amazing free shipping no sales tax ,, fast shipping ,, Looks amazing on my Jeep . Thanks TYGER GREAT PRODUCT!!!!!!!!!!!!

Comments:

these running boards look like they are double the price , clean welds ,sharp look . easy to install . pictures to follow

Comments:

These things are overbuilt in a good way. Even the packaging they came in was overbuilt! They're heavy duty and look great. Due to this, the installation is a bit of a challenge for one person. I recommend two people for installation (at least to put in the first two bolts). Overall, though, they seem like they will hold up for a long, long time and are definitely worth the price. And based on the design, I think it will be easy to clear snow from the steps as well. Time will only tell on that though.

Comments:

So let’s start off with I bout this bumper because it is a nice looking bumper for 14-20 tundra. I have a 2009 tundra that I had a 2020 tundra bumper on and it fit with no problems. So I went ahead and ordered the bumper well it fits amazing on my 2009 tundra. So if you have a 2007-13 tundra and are looking for a nice bumper buy this!

Comments:

For the money you cannot beat this bumper! Its heavy duty, well made and looks fantastic. I get a lot of compliments on it. The finish is as good as any other "leading" aftermarket manufacturers bumper at twice the price.

Comments:

This is sexist. I have two female bikes, I need two adaptor bars.

Comments:

Easy installation. Looks great. Had to call a Toyota rep to get a straight answer on wether this would fit the 2020 venture edition. It’s the same as the TRDPro. Tyger needs to add this to their web, or lose potential sales! Almost moved on...

Comments:

I put this tonneau on my 2018 F-150 XLT and it works great! Install was super easy and only took a few minutes. As far as performance, you can’t beat it for the price. I’ve had my truck up to ~60 MPH so far with this cover on and haven’t noticed any excess noise or flapping. I’ve also taken my truck to the car wash with the cover on and can confirm the cover is 100% water tight. 10/10 would recommend purchasing this cover.

Comments:

https://youtu.be/d7kuKRXrU-c This is a simple built bumper that is better than oem it took 4 hours between myself and 1 other we have 1 minor gap about a half in in 1 side we will continue to monitor and try and fix. Its about 115 lbs total with skid plate and 2 cube lights. Some trimming is required on the bottom plastic where grill clips in near the auto shutters. I'd recommend this to anyone on a budget needing stronger bumper to hold some LEDs.

Comments:

This installed behind the bumper on about a 1 inch over hang it then installs to ur frame mounts for tow hooks making a clean Baja pre runner look that finished the build.....lift kit with diff skid plate makes for a clean monster look with all the armor. It's a steal for 90$ it installed with a lift kit no issues https://youtu.be/d7kuKRXrU-c

Comments:

Just got this delivered for my 17' Colorado and it was so simple to attach. I put on the seal strip just to be safe, and after an overnight rainstorm, everything in the bed is nice and dry still. Definitely worth the money for the quality of the cover and the fact that it is a tri-fold!

Comments:

Looks amazing and easy to assemble. Only problem I had was the bolts that secure the basket to the cross beams on my 4 Runner were too long and would hit the roof. I purchased some additional washers and that fixed the problem.

Comments:

These are absolutely perfect.. strong,heavy weight, and look rugged. Perfect fit and super easy to install even for a noob.

Comments:

Love how touch this is!

Comments:

Love these! Extremely east to install and they look GREAT! Excellent packaging, quality And design!

Comments:

Very nice ,just as good as bushwacker for 1/4 of price I had a friend paint . I installed myself 1hr per side really easy good instructions. Recommendations put duck tape over nuts so they don’t scratch truck during install incase you want to take them off.

Comments:

Very simple to install, sturdy

Comments:

Tyger makes a quality bed cover. Materials and workmanship are top notch. I have one installed on a RAM 1500 short bed, and it is one of the best investments I have made. I am very pleased with this product. I am going to purchase another for a Toyota Tacoma. I have no reservations on ordering a second tonneau from Tyger.

Comments:

I love these side rails but I cant get any. I live in Canada and nobody has them. Amazon Canada is out of stock. Come on Tyger, help us out get some to Canada. Please!!!!

Comments:

Cover is easier to clean after using this spray! I also use it around the house for leather products, great!

Comments:

Just the part I was looking for!

Comments:

Ordered this cover for my new 2018 Tundra after reading many different reviews and doing some searches online. I wanted something that would be high enough quality to withstand the weather in FL and also look good while doing it. I also had a price point in my mind I wanted to stay around which was $250 and this cover not only met that price point but also had solid reviews. After receiving nine I can say that the reviews were not wrong!!!This cover arrived packaged very well and had all the necessary equipment and brackets needed. My truck has a spray in bed liner and rail system so I had to use the included metal brackets that fit into my rail system.The cover came out of the box inside a nice little cover that I suppose you could put the cover back inside if you had to take it off for any reason. It also comes with additional seal stripping in case you don't have a bed liner and there are still gaps between the cover and the truck bed. I didn't appear to need them with my truck. The clamps and toggle locks were easy to setup. The only small challenge I had was getting the metal brackets down my tail system just due to the paint on the rails. A few light taps with a mallet got them moved into position then tightened down with the included allen wrench.Overall so far I am very happy with the purchase and looking forward to how well it holds up over the next few years. It feels and looks like a high quality cover and I was able to get fully installed/adjusted in about 15 mins (between interruptions from 3 of my daughters wanting to know what I was doing out in the garage...)

Comments:

Fits perfectly on 06 Dodge Dakota Cree Cab!! Looks great!!

Comments:

I am beyond impressed by my new cover. It looks amazing. I had my 13 year old install it. It took him a little longer than usual because hes never done anything like this bit it was good practice. He did it all by himself. It seals beautifully. The cover does bow out a little where the cover folds but its not an issue at all. It makes my truck look sleek. I highly recommend it. Nice tight seal. Lined up the first time. I am beyond happy.

Comments:

Great bars!!! Installed in 20 minutes.

Comments:

I had a besttop ziprail tonneau that hat a tailgate bar that need to be removed every time you wanted the tailgate area clear. This is so much nicer. Rolls up and reinstalls easily and is taught when installed. Works well in my Ford Ranger.

Comments:

Very nice quality product, good looking, rugged and fits perfectly. I installed them in about an hour with just a socket wrench. Installation would have been quicker except I checked the bolt size on the running boards before I went out to the 4Runner, Tyger uses bolts with 1/2' heads. I started to take off the factory bolts, and Toyota bolts the inside front bolts on really tightly, my wrench was slipping and I was worried I was going to strip the bolt - then it hit me, I bet Toyota is using metric bolts. I swapped the 1/2' socket out for a 12mm and was able to crank the bolt right out.Also, the running boards are kind of heavy, I guess 40 lbs a piece. I'm a big guy, so I was able to lay the board across my chest while I laid on my back under the truck to manuver it into place and get the bolts started - if you are smaller, you might want to use a jack or something (or get some help)

Comments:

Fits great! Great Price!

Comments:

I am very impressed with the fit and finish on these running boards! Easy to install and they feel steady and secure when I step on them. I'm a big guy and they don't feel like they are going to give out on me any time soon. They make my truck looking unique as well.

Comments:

Have my Tiger bed cover installed for about 4 weeks now. Shipped quickly, east to install and performs great so far. Great experience!

Comments:

I purchased this one for my sister's Chevy Colorado, and she loves it. Much easier to use than the Extang cover she used to have with all the snaps on it.

Comments:

So easy to install. It took more time to take out of box than to install. Super happy. Can't believe I waited this long to buy one.

Comments:

It works great and the price/quality is unbeatable.

Comments:

Great cover for the money. I dont see why anyone would need a real expensive cover. This thing is great.

Comments:

In all honesty I haven't drove it at high speeds yet but everyone seams to have the same issue with high speeds lifting the front end. It has only 4 side clips. So I made 3 front clips out of some left over hardware from some hanging blind mounts I horded when I threw the blinds out. (I save weird stuff like that, for just such a project.) I bent the end over to clip, and fit it into the rail of the bed cover and then turned the flexible metal clipso it clips snug into the bed rail. Feels tight of the front now and I can still remove the cover without tools. I have drove it at 80mph with my clips on and it doesnt move. Works great and they are still easy to remove.

Comments:

I did have to make one change. Took off the plastic brackets next to the cab for traveling with the cover folded back. With the brackets on it doesn't sit close enough to the cab. This is a Nissan Frontier 2016. Just take off the plastic brackets and it fits nice and goes down the highway without any noise. Nice cover. I would recommend for the money. I didn't want to spend $800.00 on a hard cover because I just want on occassion. Travel and camping. Comes off and goes back on in a minute.

Comments:

I had the same brand on my 2012 F150, and loved it. So when I got a 2017 F350, short box, I knew exactly where to shop. Just to clarify one thing. This fits a 6 3/4 ft box. It kept telling me that it would not fit, but it does. I don't thing 2017 offers a 6.5 ft box.

Comments:

Functions as described.

Comments:

Smooth easy install and fits tight and covers the bed watertight

Comments:

Fits 2016 Colorado fairly well. It's lightweight but seems durable enough. Quick install. Seems like it'll keep my cargo dry and safe

Comments:

I am happy with the product

Comments:

A lot of people complained about the packaging so I was worried. Tyger must have listened because this thing was packaged really well in a thick box with lots of bubble wrap around the rails and a beefy styrofoam piece separating the 2 rails from hitting each other. Mine was perfect out of the box. I installed this on my 2018 Chevy Colorado ZR2 (Crew cab, short bed) and I was able to use the stock bolts and nut inserts from the stock rock slider. This product only has 3 mount points and the stock one has 4, but it doesn't seem to need it. The thing I like most is that it looks a lot like the stock sliders and I think it would function well if I need to skid over a rock, but I can now get in and out of the truck much easier now with the step. I didn't measure it, but it is maybe 6' shorter that the stock rails so there is less protection in front of the rear tire.

Comments:

For the price and look you can't beat these running boards. Fit perfect and went on2009 dodge power ram. They look great and do not move the slightest.

Comments:

These side steps are amazing!! Super heavy duty glossy black rough finished non slip surface. These things are rugged and ready for duty. Arrived boxed and foam wrapped impeccably and I installed them in under 30 minutes by myself. They are very heavy and I had to lay it on my leg while I supported the front side and installed the bolts, after that it was as easy as turning your socket wrench 6 bolts with washers per side. I am very happy with the price and quality of these side steps.

Comments:

I was kinda nervous installing it, but after reading the instructions carefully, it took me 30 minutes top; and it's a snug tight fit... I love it !

Comments:

I almost gave this 4 because one bracket was mislabeled but I quickly figured it out. I have a 16 Ram and the middle brackets had to be swapped left to right and right to left to fit. But works great and looks great.

Comments:

If you're still on the fence, go ahead and buy it. I thought about this purchase for close to a year, and am kicking myself for waiting so long. Easy to attach, good quality construction at a low price, this is a no-brainer.

Comments:

Seems to be very good quality and parts. My only complaint is that it only folds into thirds, so you waste some space and have to take the entire cover off if you have a large object (over 4.5', in my case). That being said, it is very easy to take off and put back on. 2016 Chevy Colorado with 6' bed.

Comments:

Very good Quality products

Comments:

Great cover, fits really well on my truck. If you are looking for a trifold cover for the price it can't be beat.

Comments:

Very nice well built sturdy product. Took a brother, jeeper creeper, impact wrench, a 12mm, and a 13mm (for the bolts that comes with it). It took maybe 10 mins to install.

Comments:

Product exactly as described. Fit my 2018 Ram 1500 perfectly. Some other reviews noted instructions did not provide adequate directions for installation. Though this is true with some mechanical aptitude installation is a breeze. It took approximately 30 minutes to install and square with truck box.

Comments:

Seems like a good product....would be nice if it had 4 mounts like the oem running boards instead of 3 but many aftermarket setups just use 3 however I am a 300lb giant so hope it holds....the plastic covers for the brackets are cheap with push pins holding them on I may upgrade to black bolts just to be safe they don't fall off...looks good and for the money can't beat them...I figure If they last 5 years I can change the look of my truck later if they rust our or are just junky looking.... only other think I don't like is the bracket for the def tank just send both brackets and if you don't have def be easier to just use the plain bracket

Comments:

Great cover for a cheap price but not cheap quality

Comments:

First things first, guess I'm an idiot cause this took me well over an hour to install. I was having a problem latching and closing the cover. It would not close for me no matter how much tightening, loosening, adjusting I did. So I said screw it and completely uninstalled the cover and every part and bolt that came with it, watched the YouTube videos that everyone recommends on here and what do you know, the damn thing closed. I guess the fact that I put it on in 30 degree NJ winter weather didn't help the material stretch so it's pretty snug fit. I'm not going to open the cover for a few days so I hope that will help the material 'relax on the rails. Besides the little hiccup in the beginning the 2nd install took about 40 minutes, when my hands weren't numb.

Comments:

Based on price you cant beat them. The fit is awesome. I had no issues at all with front. The rear required a little tweaking to get them to sit perfect.I used my youngest daughter for a second pair of hands. Assembled in house and then installed in driveway. 45 minutes to unpack and install the SS dressing and trim rubber.20 minutes to install front. 1 hr for rear. Never needed to pull tires off of truck.I did use some of my own hardware in rear as I couldn't get the look perfect and still use the factory finder holes on the Left side. My guess is a previous owned hit something with the bed and the body work was the issue. That why you trail fit first.My opinion is they look every bit as good as my buddies high dollar set. $$ for the money they are very much a better deal. I have installed the high dollar ones as well and ALL of them have to be tweaked a little.

Comments:

Be prepared for the massive package when it arrives, It would be best to get help handling this one! The care taken to package this product is the best Iv'e ever seen! After you make your way thru the Styrofoam, bubble wrap, foam padding and tape you will be greeted with your new running boards and install hardware. Grab a 13mm deep well socket (and a friend if you have one near, although not required) and allow 45-60 minutes for the install, before you know it you will be enjoying the new look of your truck.Stop hesitating and pull the trigger, These things are build tough and look great too. I installed these with only a ratchet and deep well socket, all the brackets are welded onto place and lined up perfectly, no persuasion tools required

Comments:

Works perfect had it installed in less than 30 minutes

Comments:

Very impressed! Was, like many, hesitant to buy from an unknown brand and was not a big fan of the stars... but once these bad boys were installed (in about 45 mins) they added the perfect aggressive styling, good step height, door protection I was looking for without impacting ground clearance really at all! The matte/gloss blend is pretty unique and pops against my silver Tacoma really well! If you're looking for a step, style, and protection from dings - buy this. If you're looking for something to rock crawl, you need something a bit heavier duty. That said I'm extremely satisfied with my purchase!

Comments:

Cover arrived quickly and in good condition. Very simple to install and use. Fits truck nicely. A local place was going to charge $50 to install. Two people got it done at home in minutes. Would recommend. It covers well and is simple to use when you need to open and close it.

Comments:

Very happy! I love this tonneau cover. The price is right and it's built as well as the others which are $250-$400! The only reason I rated a 4 is because the top clips that secure the cover while it's open are very close to the cab/paint. They're plastic and won't do much but over time I could see these touching the paint and wearing a spot. If I had to choose again I would still order this cover though! Fits my 2005 GMC canyon very well out of the box and took about 10mins for initial install, and now I could pop it on in 5 or less. I only put mine on for trips and store it while not in use. My buddy bought one and he uses it all the time. Very Happy.

Comments:

Received and already installed.Looks great, went on with minimal swearing.Wish I would have ordered sooner!

Comments:

So far so good I love the coating took about 30 mins by myself to install, packed well also

Comments:

Excellent quality. Better than I expected.

Comments:

Took all of 10 minutes to install. That night severe rain storm and no leaks.

Comments:

I wanted to replace the old roll top cover on my truck, I saw this cover and was a bit skeptical because the price seemed low compared to other covers. This is well packaged and looks pretty durable. Installation is pretty straightforward, well written instructions and it looks fantastic. I recommend this product if you are looking for a truck bed cover, want something that looks good and is easy to install.

Comments:

I'm pretty much an unskilled installer, but I was able to actually make this product look really great on my 2011 Silverado! It took me a half day to get rid of the original mud flaps due to salt corrosion but my mechanic lent me grinder, which zipped 'em right off with barely a scratch to the paint. It then took me another 8 - 9 hours to install, mostly due to my own lack of experience. Some hints from my own errors and misunderstandings: 1. The 'clips': there are 2 styles, one is actually a spring clamp which tightens with a screw; 4 go in the sides of each flare. Then the 2 that do actually just clip on go at the top of each flare to act as a nut for screws you put up through the flare into existing (factory) holes. I mounted the flares without help and had a very difficult time keeping the flare held up while inserting the screw up through it and into the 'clip' while keeping it centered on the factory hole (it's a blind operation, you can't see the hole). I was eventually able to do it by sticking a nail down through the hole to act as a guide that I could push out with the screw, although it was still difficult because you need to use some force for the alignment. 2. The 1' seal: maybe because of my stupidity I never realized it goes over the outside lip of the flare to seal it against the truck's fender. It's also really about 1/4' (U-shaped, 1/4' wide front and back) and they provide a tool to help separate the front and back to fit it over the fender lip. I didn't realize how the tool is used, I guess because it's the last thing depicted on the instructions, so I used my fingers to separate the front and back of the seal to fit the fender lip between them; a slow and, eventually, painful, way to do it. Also, I decided to NOT wrap the seal around the end corners of the flares since I was concerned that it may not hold on tight corners and that they may have only provided a minimal length of seal strip. As it turned out, they DO provide an adequate length to completely cover the outside edges of the flares, I had about 2' left, but it looks just fine ending the seal where the flare lip goes out of sight. 3. The hardware: I took the advice of some other reviewers and replaced the bolts and washers (not lock nuts, they're not visible and pretty protected) with stainless steel hardware, which added about $50 to the cost. 4. Removing wheels: I had to remove the rear wheels to remove the old mud flaps and, if I were doing it again, I'd probably keep them off and mount the flares immediately. The spring clamps mentioned in paragraph 1, above, require some pressure to start the small bolt in the clamps' hole, not a problem with the front fenders but pretty hard at the lowest parts of the rear. I used an offset screw driver and got it done but with a mental note to monitor them for a while.

Comments:

Looks prefect for my Jeep Wrangler Unlimited. Absolutely the best! Heavy Duty and well made. Highly recommended!!

Comments:

Great tonneau cover and easy to install!

Comments:

So far so good. Box came with the bed cover, the rails, the mounts, and a carrying bag. Bed cover was easy to install, came with very clear instructions, and they also have videos on YouTube that will show you step by step also.

Comments:

I don't write many reviews but for the bang for buck this is a great bed cover. Got it just before a trip where we literally encounter 7 straight hours of rain (not sprinkles...downpour) at highway speeds of 70mph. Then destination had legit storms leaving us with less than 150ft visibility. Coming home at highway speeds another 5 hours of downpouring. Install is crazy fast and secure...opening multiple times and re-securing is super easy. All that to say, the bed of the truck stayed bone dry given it's extreme torture test and secure to bed. If there was any water it was from opening and closing tailgate to get luggage or equipment out. It's not built for security rather it's for the elements. Great product and alternative to hard shell cover. Remember to measure the bed of the truck from the inside of the bed (bulkhead to tailgate)...I had to search for proper measuring guide to be sure I got the right cover length for the truck.

Comments:

Fast shipping and great packaging! Got here in great shape. Looking forward to installing them this weekend.

Comments:

This cover was very easy to install and it sealed up very well. I am happy with the ease of installation and the price. If I have any complaints it has nothing to do with the cover or the manufacturer. My problem was with the shipping.

Comments:

WHAT A GREAT COVER.! WENT ON IN 15 MINUTES. LOOKS GREAT

Comments:

It fits great and looks great! Nice price and easy to use totally recommend this product.

Comments:

Installed on 2001 Silverado 1500 extended cab, 6.5' bed. Fit and function are perfect. Couldn't ask for a higher quality product at this price.

Comments:

Very impressed with the quality. The finish was very good. They fit right onto my truck without issues. The instructions were clear and easy to follow, and the packaging was excellent. The entire install only took about 45 minutes, including getting my tools out and cleaning up / putting them away. All you need is a socket set. All in all I'm happy with my purchase,

Comments:

Installed in a half hour. Works great. Looks great. Have had it for several months and nothing has gone wrong. Other reviews regarding slight gap where, I suppose, water could come in are true, but I haven't had any problems with it. For the price, probably can't be beat. You can solve any water issues with a piece of sticky rubber insulation anyway. I'm very happy with the cover.Also, if debating the roll up versus the tri-fold, go with the roll up. I don't understand why there would be any advantage to the tri-fold, as the role up will get completely out of your way when putting things into the bed, and at the same speed.

Comments:

Great product. Install was a breeze with included gaskets for the front of the bed. The operation of the rollup and locking/unlocking mechanism is fantastic for its price point. I will eventually adjust it so there is more coverage on the tailgate. Have not tested its waterproofing yet. Would def recommend.

Comments:

This was a fantastic purchase. The item came well packaged, no damage. It is so easy to install, just a screwdriver and a wrench - no drilling required. Once you've done it the first time, you can literally install or remove the whole thing in 5 minutes. Once installed you simply unroll the cover and lock it into the latch at the tailgate end, with a clever mechanism that ensures the whole thing is taut. Once the tailgate is shut it is as secure as you can get with vinyl, and pretty much waterproof. So easy to roll/unroll and the best thing for me is that when rolled up, I can still access the sliding back window for long pieces of conduit, unlike the hard covers.

Comments:

Great

Comments:

I love it wish I would've gotten this sooner! Showed up extremely late but more than happy once it came.. Put it on right before the rain , not one leak ! Put it to the highway test the next day . No problem at 80mph.. If your on the fence . Do it ! Trust me you won't be disappointed. !

Comments:

Awesome , Can't be beat for the price. Easy to install and after a month of use all is good. Will update if anything changes.

Comments:

Excellent fit on my 2017 f250 supercrew, the ad was correct, they fit perfect. Quality appears very good and installed in about an hour

Comments:

The cover came on time, the instructions were easy to follow and the Cover looks fantastic on my 2009 Tacoma.. Exactly what i was hoping for and and great price compared to others offering a similar product.

Comments:

Tyger made a great product. Rolls up nice, fit PERFECT in the Toyota bed rail system. Holds tight and you can lock your tailgate and the cover can't be opened. Very nice! Good buy! Took about 15 minutes to install.

Comments:

super addition to my 2011 SLIVERADO:))

Comments:

Great fit! Would recommend this to anyone.

Comments:

Great product. Love it. Bought it for my boyfriend and he put it on with no problems and loves it too.

Comments:

Very happy with the product so far. The installation took me around 1 and a half hours. The center mounting bracket was a little tricky to install but other than that it was a direct fit. The only downfall is that they offer free shipping to anywhere in the United States but no shipping option for Canada. I had to use a shipping option available to me through my work.Excellent quality, arrived in excellent condition packaged really well. They have a really nice finish. Ijust hope that they will hold up from the salt during our harsh winters. I have sprayed both sides with rust proofing.5 STARS

Comments:

As expected. Looks good and fits well.

Comments:

It was on time excellent quality love it haven't had it in any bad weather but don't expect any very pleased

Comments:

Good quality. Very easy to install. Looks great, and easy to use. Great product, great price.

Comments:

These steps are heavy duty and look great on my 2009 Dodge Rams 1500 extended cab. Design and attachment system is very well engineered. The first side took about an 1.5 hours but the second took less than an hour once I know what to do and what tools I needed. They are heavy much heavier than my stainless steel set I removed. I recommend a helper to assist in getting the steps in place once you have the screws located in the frame rails. Also I didn't get any measurements from the dealer so here they are. Dimensions; 76' long, 6 3/8' wide and 4 7/8 deep.

Comments:

I love this cover! Lightweight but surprisingly sturdy for the price. We didn't use the extra seal and it never leaks even during a torrential downpour!Fits 16 colorado long box perfectly.

Comments:

Yes thanks perfect

Comments:

Looks good and works well. Super easy install. This fit my 2013 f150 with the 5.5ft bed great. One thing I would suggest, there's an extra piece of weather stripping, mine was crammed into the very bottom of the bag and I didn't find it until after the install, use this for the front roll up piece at the top of the bed, it makes a better seal than just the one that's already adhered.

Comments:

Accidentally bought the 2013 double cab bed cover for my 2015. Still fits. Paid four dollars more lol. Gas mileage went up from14.9 to 15.3 MPG. Chicks on tinder dig the cover for some reason.

Comments:

they look better than the picture. They went on easy with some help and are really sturdy. Very pleased with this purchase.

Comments:

Fit out 2011 Silverado like a glove! Installation was easy- just make sure tracks r where they need to be so the top will lock before you put down the clamps!!! Keeps everything nice and dry!!!

Comments:

It is easy to install. It fits well. It has a slight leak, but nothing to really worry about for my use. I don't like that the locking clips system is difficult to latch. I actually have to push down on the corner forecfully to get it to latch. Also, if it is a windy day and the gate is open it will unlatch. For the price it is well worth it.

Comments:

This cover looks great and goes on super easily. For the price, it is a great purchase. One that I will recommend to others whenever I can.

Comments:

I wish I could give the 10 stars. I have a 2014 F150 Super Crew with the 5.5 bed and I'm beyond impressed with Tygers product. This is my first truck so not only was it a breeze to put on, but the quality is amazing. I'm still blown away by what these guys are asking for this roll up cover. Unreal quality, easy install, and I'm beyond satisfied. Will definitely search for more of their truck products!!

Comments:

I was amazed how easy this was to install. Made a trip to PA with it and am amazed at the quality.

Comments:

Bed cover arrived on schedule with all parts included. Directions were easy to follow with assembly completed in about 45 minutes. Great bed cover for a light duty type pickup.

Comments:

Went on easy and looks great. Its not heavy duty and it's not gonna keep thieves out. It does have a locking mechanism so at best it will keep the honest people honest. For my needs it will work great.

Comments:

Easy, peasy installation. Fits like a glove to keep water and debris out of the bed. I especially like the roll up feature for when I'm towing my 5th wheel RV.

Comments:

These do fit perfect on a 3rd gen ('16 to present) double cab long bed. Easy Install took about 45 minutes. Good on Tyger for color coding and packaging. They feel solidly constructed and very well made. They have been on a week and I still like them. I did email Tyger Support to confirm fitment and they insured me that this is the correct application.Cons: Black gets dirty easily but I'm used to that with a black truck.

Comments:

These are the risers you are looking for. Very nice quality and construction. The installation is incredibly easy. You don't even have to give up your man card by reading the instructions. The color coding packaging is a bonus. Took me 1/2 hour and 1 socket to install.

Comments:

These work well on the truck. Fairly easy installation, especially if my husband can do it.

Comments:

Fits well and is very secure. Dry inside even after driving in the rain. Easy to install and remove.

Comments:

2017 Chevy Colorado short box. Fits like a glove and less than 30 mins to install. Quality is on par with the $300+ covers out there.

Comments:

We were a little skeptical because of the price but we are very satisfied. We recently took a weekend trip with both of our kiddos so the truck bed was loaded. Not only did the cover keep our things safe, my husband says that it does help to improve gas mileage.

Comments:

This is a great product. It took about 5 minutes to install. I can't believe people had any difficulty installing it. Piece of cake and looks good.

Comments:

Fit my 2017 tacoma double cab SR5 perfecly, love the look! Took about 30 minutes or so to install.Only issue was that I notice about a dime sized dent (pic) after I installed them, when the light hit them just right, notified their customer service, haven't heard back yet (it's only been a few days). Just inspect closely BEFORE installing.

Comments:

As mentioned in my video, I drive a small, off-road capable vehicle and I wanted a multi-functioning shovel for recoveries, camping and general use. This shovel is compact, light and fits perfectly in the back of my Subaru. Every component is well made, sturdy and it looks great too!

Comments:

For the price, I don't see how you could go wrong. The instructions were really unnecessary as installation is really intuitive. Put the bulkhead piece on, slide the sides in and tighten 2 Phillip screws. Then line everything up and clamp it down using a 10mm ratchet. It's really that simple! Took about 15 min to do by myself.It looks really clean and I am really amazed at the quality for this price point. Sure, there's room for improvement as far as a few material choices go, but it was $189! It rolls up out of the way very easily to allow full use of the bed.

Comments:

Excelente. Buen producto.

Comments:

Very well made. Had a problem with alignment but customer service got everything straightened out.Easy to install and looks great.

Comments:

Love this bed cover, strong, sleek, stylish, and worth the money. Easy to assemble and put on.

Comments:

I opened the box and it was wrapped in a cover, just amazing!! The tonneau cover is awesome. So simple too install and seem to be made a good material and craftsmanship.I wish there was a center fastener BUT BUT that's just me. The front and rear fasteners secure the cover without an issue.I installed this in 20 degree weather without any issues at all.Very impressed with the cover. Thank you very a well built product that is well worth the price !!

Comments:

Great cover for the price. I have it installed on 2015 Toyota Tundra and it fits perfect. Super easy to install. There are much better covers on the market, but for the price you can't beat this cover.

Comments:

Nothing about this is bad. I LOVE it.

Comments:

Great item, so glad I got this one! It looks good, was easy to install. the co. had good instructions and video. Love it!

Comments:

I'm very happy with the cover. I wanted something to keep the bed dry but was easy to remove and put back on. I had a Back Flip style cover on my old truck and I liked it but it was not easy to remove if I wanted to use the entire bed. This one fit perfectly, it took me about 10 minutes to install it and I have a cast on my left hand! I have the cargo tie down system in my truck and this shipped with the adapters for the clamps that fit right in the cargo system. Just slide them in, put the cover on, align the adapters with the clips on the cover and tighten everything up. It looks great! I like that it comes right off if I need access to the entire bed. I've driven in rain, snow and through the car wash several times and it does not leak. It seals better than my $800 Bak Flip did. I'm really impressed so far.

Comments:

It was very easy to install except for our 5th wheel hitch in the way my husband is84 and I 82 thank you for a easy and great product also price

Comments:

nice cover

Comments:

Fits 6.5' box on 2014 f-150 STX Supercab very well. Would be nice to have maybe an additional 1/2 inch in length, but seals fine. Definitely needed weather stripping on forward rim of box to level and seal to rubber bladder on cover, plus on tailgate to keep water from spewing up . Seems very sturdy and looks professional, not cheap like so many I've seen. 65 mph tested and it didn't make any noise discernible in the cab.

Comments:

Directions aren't the best but it was pretty simple I highly suggest to just YouTube how to install this. Very easy to install. Took about an hour at most. Looks really clean and durable. Came really fast also. Hopefully it can last through winter

Comments:

Exceeded my expectations and really like it. But for my 2012 Tundra it needs to be about an inch or 2 longer and about 3 to 5 inches wider to be easier to put on. It is almost too short in both directions so you have to be careful when you first put it on to make sure it seals. Once on it's great but I take mine off a good bit for hauling things so it's always a little bit of a pain to line back up but only about 10 minutes or so worth.

Comments:

Fits great! Easy installation and keeps the inside dry! You have to make some cuts if you have a over the rail drop in Bedliner.

Comments:

8 minute install great product

Comments:

Received the Tygerpro Tonno the day after I ordered it. Packaging was excellent, there was no damage, and all the parts were there. It took me about 30 minutes from unboxing to finished installation. The only issue is the instructions. They aren't particularly clear on where the side rails insert into the cover bracket. Otherwise they're pretty straightforward. I actually like written instructions as well as pictures, but that's just me. There is a three minute company video online as to how to install it. It requires a 10mm socket and #2 crosstip screwdriver.I was able to leave the bedliner in my truck. I did originally install the supplied weather stripping, but didn't need to as the bedliner is already flush with the top of the bed. The cover bracket already has foam rubber weather stripping attached, so adding the extra left an angular gap where the side rails rest on the bed. That's not clear either.The cover itself seems well made for the price, and perfectly fits my 2015 Tundra w/o bed rails. The additional parts for bed rail installation are included. Everything is nice and tight, and adjustment is easy. I recommend it.

Comments:

Very nice! These rails bolted right up on my 2016 Ram 1500 Crew Cab Laramie! Perfect fit! They are solid and look great! I installed them by myself in less than an hour. I even bounced up and down on them and they didn't budge. I'm 6'1' and 200 lbs...no wiggle or play whatsoever! I would highly recommend these! Especially for the price! Well done, TYGER!

Comments:

Impressed with these. They took my husband about 30 min to install on our 2018 4Runner, SR5. I really like that they are textured too. I feel like that will help in slick conditions. They look great and they help me (I'm 5'4) and our toddler, climb in and out a lot better! 5 stars from me!!

Comments:

These flares are far superior to the other cheap ones that I had on the truck (off Ebay). These came with all required parts and even the bit for the torx bolts on the flares. The directions were very good and easy to follow. The flares fit the truck perfectly and after pre-installing the exposed bolts and the weatherstripping, they bolted right in place and they look and perform great! Great product for the price!!

Comments:

I've had several truck bed covers in the past, but the Tyger cover is the best one yet. Fit is perfect. The materials are heavy duty. Installation is easy and fast. I've only had it installed for a few days, so durability and longevity remain to be seen, but I believe it will hold up well. It looks great on my truck and is easy to deploy or roll back. The installation instructions are not as clear as they could be, but there are several videos on YouTube which make the job perfectly clear.

Comments:

I ordered the Tyger Riser for 09-16 Dodge Ram 1500 for my husband's 2014 Dodge Ram 1500 truck. They fit perfect ! The instructions where extremely simple and the fact that everything was labeled made everything much quicker. The only thing we had was the bars themselves where labeled backwards but it wasn't a problem & it didn't slow us down at all. I have helped my husband put on several things on our vehicles and NOTHING has been as simple or as quick as these bars. I highly recommend them

Comments:

Timely arrival. Easy to install. Looks great on the truck!

Comments:

Put this on my 2011 Chevy Silverado and it fit great. Bed stays dry and nice to be able to load things under it and not worry. Great Product

Comments:

Looks pretty good on FJ cruiser 07. Really easy to put on except the stupid holes were rusted a little and that was annoying. Anyways, super happy with how it turned out and the over all product!:)

Comments:

Product arrived promptly and well packaged. Unboxing was easy, and everything inside was also well packaged and secured inside the box.Install was easy on my 2018 F-150 with the Ford factory bed liner, just follow the directions. I got mine installed in ~20 minutes. One tip I have, use a 10mm socket with a drill! Saves a ton of time when tightening down the clamps. If you're worried about going too far just use a ratchet when the drill has them tightened down. Other than that, has held up well going 70mph on the highway and appears well sealed against the elements.For those of you with 2018 F-150s, or anything with the aluminum bed, the included magnetic light will not work. My bed has two bright LEDs on either side, so that wasn't a big deal.Wouldn't hesitate recommending this to friends.

Comments:

I bought this cover based on the excellent customer reviews. I had it shipped to my local post office and when I arrived to pick it up I was shocked at the size of the shipping box. I was not expecting it to be so large. I was also somewhat confused as it was kind of an odd size package. But when I got it home and opened it I realized it was shipped with one of the 3 sections folded, making for an unusual looking package. After opening it I inspected the cover for damage and made sure all the parts were there. I bought my 2012 Dodge Ram 2500 with 8' bed used and you could clearly see the previous owner had a cover or cap on the truck before. Because of this the front lip was slightly lower than the rest of the bed rails. I ended up using the seal strip for the front rather than the back. I placed the cover on the truck, adjusted the fit and tightened all the clamps. I am a 48 yr old woman and I was able to install this cover in less than 30 mins by myself. It was very easy to do. It's only been on the truck for one day and I'm already very happy with it. I haven't driven with it on the highway yet but I've gone down the road at 45 mph with no issues what so ever. I'm curious to know if it leaks but it hasn't rained here yet. So far this is an excellent product at a great price. Highly recommend to anyone looking for a bed cover for their truck.

Comments:

WOW! These are phenomenal! I was planning on buying the Ranch Hand version at my local truck outfitter for twice the price, and man, I'm sure glad I didn't! These are very stout, very well made, and have a very nice finish. They fit very tight to the body of the truck, but still offer ample room for stepping into the cab. I absolutely can't speak highly enough about these!

Comments:

These were easy to install. The price is great and the quality seems to be as good as other step rails costing more. The book had step by step installation instructions and the whole project took a couple of hours. I would have liked a u-tube to watch. It might be there but I didn't find it.

Comments:

Purchased this cover for my '18 Silverado crew cab w/ short bed. It took around 45 minutes to install, love that there is no drilling. All you need is a Phillips screwdriver and a 10mm socket. It took very little adjustment once installed to fit perfectly. It looks great and is very easy to use. One thing I was very impressed with is the amount of weatherstripping and foam on this cover. I had an old access tonnosport rollup on my '99 Silverado and it had none of that. Looking forward to testing out how water tight this new cover is. Great product!

Comments:

The product arrived on time. The directions were a little hard to understand at first. There are two different styles, one with factory threaded holes and one with open holes that you will need to use the attached clips. After understanding this, the installation was easy and went quick. The risers look great and they seem to be sturdy. I will look into other products for my truck from Tyger.

Comments:

I bought a used 2009 Chevy Silverado a few weeks ago that didn't come with rails. After I looked for a few weeks I decided to by from Tyger. I did this for a few reasons: 1st - it comes with a warranty which I hope to never use. 2nd - they make products for jeeps so I know they can last through a lot. 3rd- why be like every other truck out there with more common rails that look like stock or iPhones. The placement of the rubber is spot on at the doors, but I would like to add more grip to the slick parts for those just Incase moments. When first opening the box everything is color coded with plastic for easy planning. Green is drivers side and clear is passengers side. The instruction manual was easy to read and total Assembly took about one hour just taking my time. All you need is a 13mm socket, put everything together but don't tighten until everything is set. I started tightening everything down from the middle then front follow by back and used lock tight. I would have taken more pictures but I installed everything in the rain because I could not wait any longer. Once I save up more money I plan on buying more products from Tyger.

Comments:

Great price, quick easy install, perfect fit. You can't go wrong with this bed cover!

Comments:

These side steps are awesome! Well built, easy to install, and very eye catching on my charcoal grey Tundra. Installation - while the instructions are clear the photos are a bit difficult to see exactly where the Tundra existing bolts are located. It took a bit of hunting under the frame, but once I found the first one the rest where easy. Note there are four pre-drilled locations per side, but the step only uses three...very obvious, just line up the step brackets. I installed the steps alone so it was a bit challenging to get the bolts started. I used a furniture dolly built up with some scrap 4x4 to help mate up the steps to the truck frame. I recommend a helper, if available, as they are very heavy.My only critique was (hence 4-stars, vs 5) the shipping carton was nearly in shreds and taped up when it arrived. Clearly these things are heavy and need some serious packing. Fortunately, the package of bolts and instructions remained in the carton.

Comments:

Love my new step bars. They were delivered timely, installation was a breeze (took less than an hour) and they just look awesome. Very happy with my purchase. All in all saved myself a ton of money.

Comments:

2018 Silverado 6 1/2ft bed. Fits great. Easy to install. 10 outa 10 would recommend.

Comments:

Wonderful product and fits perfectly plus looks great. My Tacoma has the rails and they supply the rail system. Only negative is I wish they would supply 2 more clamps for the front so the wind does not rattle it. I made up my own but would be nice.

Comments:

Was exactly what I wanted for my crew cab 2018 Tundra 5.5 bed.This came 3 weeks before they said it would And it's perfect! Don't be afraid to order.Only thing was it comes with 6 clamps for track or 6 for regular setup so you need to remove the screw part of the clamp from the regular to put together to the 6 that fit tracks and that is all. Also make sure to use the extra seal that comes inside the big bag for the front, (front doesn't take clamps)I saw the seal after I was installing it so it had to be removed to use the seal.If you set the 6 clamps loose enough you can adjust it all and then tighten after all is looking perfect. Start tighten it up from the back so the end is flushed with tail area.This is a great priced item.Another thing is that my bed has a pull out drawer for 1200 lbs and coolers fit great under cover, at least my big white cooler and a mid size do.Love it love it!

Comments:

Installed on a 2017 Ram Short Box truck and I'm very happy. Note no seal is needed at the front, only at the top of the tailgate if you so choose. Fits good, seems to be of good quality, and Now I have lockable storage in the bed of my truck!!! Couldnt be happier.

Comments:

Easy to install, directions easy to follow and so far works great. Well worth the money spent. Out of the box and installed in less than 15 minutes.

Comments:

This bolts to the body and Not the frame of the 4runner. Basically a glorified running board that will protect against shopping carts or vehicle doors. I would not recommend using these as rock sliders. You'll end up with a warped body if you try it against rocks. The installation was simple but make sure you only have all bolts half thread so that the front Bolts are easier to install. Looks great and makes entering my 4runner much more convenient. I'm happy with the board for now because of the value but will be opting for true rock sliders in the future.

Comments:

Unbeatable price and value! Installation was easy! Very helpful when getting in/out of truck. Cosmetically very appealing. Seems very sturdy and I don't foresee any problems.

Comments:

Let me start off saying this thing is great. If you have any reservations at all do yourself a favor. I researched these for hours and came out with this one and am glad I did. I bought this "used" however when I received it the only thing that was a little rough was the packaging, the cover was brand new! Extremely easy installation, took all of 15 minutes by myself. Also extremely easy to adjust tension and stays tight and dry. Would buy again in a heartbeat.

Comments:

Easy install all the parts were there instructions fit perfect 2016 Dodge Ram 2500

Comments:

Decent product. Tight fit.

Comments:

Excellent bed cover. Installed in 20 minutes. Pulls tight and no water gets in even through the carwash.

Comments:

Quick ship. 30 minute install on 2017 4Runner TRD off road. Arrived in perfect condition and look great!

Comments:

I was apprehensive about buying a vinyl truck bed cover for this price. I will not state what I paid, as it will be different for your market. It was a good price, to say the least. So, why should you buy this cover over any other? I sought out a cover that would be easy to install and remove as my needs dictate. As other reviews have stated, this cover takes about half and hour to install; that is from opening the shipping box through to closing the tailgate to admire your work. It is easier than you can ever imagine.The cover fits the truck bed as stated. Just the right amount of overlap to look professional. I am very pleased with the fit. When it is folded for partial cargo, the cover is still very good looking.If you are looking for an economical solution that looks great, this is the cover I recommend. If you want to impress your friends, people that don't pay you to drive your truck, and anyone that doesn't matter; go buy a more expensive truck bed cover that does the job this one does. This truck bed cover does the job it is made to do, it is a great price, and looks great. Great buy for me.

Comments:

Best roll up cover for the money

Comments:

2008 Dodge Ram 2500 quad cab 6.5ft bed.

Comments:

I have a 2019 Tacoma and this tonneau cover fit on my 6ft bed like a glove! I ordered it on accident not knowing it was for the previous generation but I installed it anyway and if it's just I ordered it on accident not knowing it was for the previous generation but I installed it anyway and it fits just fine!

Comments:

They are great and they look awesome. Easy installation!

Comments:

Fit just right, it's a very nice cover!

Comments:

SUPER easy install (my 5 year old did most of the work), good packaging, extremely nice quality for the low price point. Not a huge fan of the stars, but that's just personal preference. I bumped my leg on them getting out of the truck for the first week, but got used to it quickly since. Awesome steps for reaching my roof rack and helping my kids get in and out of the truck.

Comments:

I really like the product finish and the look in the truck, also like the 'do it yourself' installation process and no complaints about the fast shipping, however i have to say that one of the 8mm bolts that attach the step to the mounting bracket keep in freely turning around after I tightened even though I'm not a super power person so I just tightened up the rest just a bit enough, I hope that it will last long.

Comments:

I installed them on my 15 ram 2500 and they fit and look great. I did have to remove the factory mud guards and almost had to remove my cummins emblem but I carefully moved the fender flares enough to where it barely touches so I'm happy. They look well made and tough but time will tell. Overall it took me 1 hour and 30 mins.

Comments:

This is a very nice bed cover for the money and I have had three pickups with bed covers. It's a simple but ingenious design that is very water resistant. It literally takes me about three minutes to take it off completely and four minutes to put it back on. No drilling or modifying of your bed. Worked perfectly with my bed liner. The only complaint is you can't fold it completely against the rear window. If you need more than 2/3 of your bed to be opened up, you will have to remove it from your truck. The vinyl material and heavy stitching are perfect months later. I recommend it.

Comments:

Well up to this point the cover was worth the price, easy to install and looks great. Now we will see how it works going down the road. I bought this top to protect my load from the elements while traveling. When we haul our 5th wheel we can fold it back and hook up without removing the top. Two thumbs up!!

Comments:

Love it!!

Comments:

Follow the instructions and they are as easy to install as advertized. They were too easy to install so the first one I tripled checked to make sure it was correct. I did leave off the plastic peace. I liked the Tyger Riser better without them. A personal preference I guess.

Comments:

Based on a recommendation from a coworker that put a Tyger on his truck almost two years ago, I purchased one last week and put it on my 2015 Silverado. It was freezing cold the night it arrived, but like a kid with a new toy, I had to install it. It literally took about 20 minutes, and the longest part of that was due to me misunderstanding where the safety straps were. In fact, I sent an email to Tyger saying that my cover came without them. Upon further review, they are permanently attached to the front clamp mechanism, and were just taped up to where I did not see them without removing a lot of wrapping which I know is there to protect the soft cover during shipping. Tyger's customer service team responded the next morning and I was happy to tell them I just got too excited and did not take time to completely unwrap the front clamps before I sent the message. I kind of expected the Safety clamps to be on the middle portion of the cover and the mistake was entirely mine. Their customer service team was polite, prompt and said they fully understood my confusion.I'm excited to see how the cover holds up, and based on my coworker's experience I anticipate complete satisfaction.I did wonder if the fold seams at the hinge points would smooth out after time, it only took one day in the sun and the bulges disappeared. The side of the cover is smooth and shows no indication of the hinge point (I think that probably happens because they are built, folded and put in the box to sit while waiting to ship. It literally only took one day in the sun to lay down, which makes me happy for future folds when I do remove it for some reason and put the cover in the included storage bag.Again I state.... Great product Tyger. Thank you.

Comments:

bought this cover for my 06 Mitsubishi raider truck. It fit perfectly and keep water and snow out of bed when I traveled cross country. Takes 10 minutes to set up, for the money you can't go wrong with this.

Comments:

Great addition to my 2011 King Cab Titan. Easy to install and remove and incredible increase in gas milage (2.5-3 MPG).

Comments:

Easy to bolt on -- with just half the number of bolts of that other brands use since the mounting brackets are welded-on solid. Move slow and the install it might take 30 minutes per side. What I like about 'em: #1) They have that bottom 'rock-slider-like' protective bar, #2) they are close in to the vehicle so that tall people can just bypass them and the short people and toddlers and little kids that need them don't twist an ankle in the gap between the vehicle and the step, 3) The laser-cut Tyger profile and the Stars are stylish and eye-catching while providing an actual safe step for those who need it, and perfectly positioned boot-scraper for when you need it. They don't just look fantastic, they are fantastic on my 2016 Chevy Colorado 4x4.

Comments:

Love it!

Comments:

Don't look anywhere else. This is the one. Thick material, strong but lightweight, keeps bed very dry, low profileTake it easy on the rear plastic handles!They don't need to be cranked down super hard. When you go to crank them down and feel resistance, back off and wiggle them or loosen them a turn or two.

Comments:

Literally took 15 min to install. Cover fits tight and looks great

Comments:

Very easy install, and look Great

Comments:

I'm a heavy set 60 year old man and it took me a little over an hour to install these step bars. The only tool I needed was a socket wrench, but could've done it with a key wrench. More importantly, these side steps look sharp on the truck and are completely sturdy when I step on them. Definitely a very good value.

Comments:

Like many reviews said, they sent me the wrong one. But they sent a replacement that got here fast. Overall impressed with the quality and installation ease. The clamps are well designed and the entire cover looks professional after 30 mins of easy work. Time will tell on durability but I love the look and ease of rolling it up if needed to carry large items in the bed of the truck.

Comments:

fit well easy to install and seals nice to the bed with the small exception of the Connors in the rear flair up slightly. they seal good thought its just a little annoying. and can stand up to the snow in NY.

Comments:

As advertised and easy install. No drill, bolt on install. Just make sure your vehicle doesn't have rust at the mounting spots. I installed these and later had to reinforce them because the thin metal on the underside of my truck had rusted and they were kind of wobbly. But that's do to Ohio winters and road salt, not this product.

Comments:

2014 Silverado Crew Cab 4x4.The cover looks great and was super easy to install. Phillips screwdriver and 10mm socket. Very pleased with it, took about 20 mins to install, could have been less but wasn't rushing. For those who don't like reading instructions, there's. 3 min videos on YouTube that I just skipped through real quick. Highly recommend this cover!

Comments:

It seals out 99% of water, only having a few drips come in in the corners near the cab. It is sturdy enough to set a drink or a bag on with no worries. I can also say that I had a noticeable difference in mpg's. I would have liked it better if it had some way to lock it down so I was comfortable leaving it folded up at times, but overall it's a great cover.

Comments:

Great product! Hooked right up to my 2017 Pro-x4 with no issues. Tough look a lot of compliments just all around awesome. Very sturdy and well built nothing cheap about it. For all my Nissan XD Family it's a must buy.

Comments:

Love these. For the price I thought they would be light duty. I was wrong. These are pretty heavy duty for the price. More then I expected. Bolted right up. If you can I would suggest a 2 man job but I did myself but wasn't easy holding up and bolting at the same time.

Comments:

Installed in 30 minutes or less and it was a perfect fit for my Tacoma 2017 TRD Sport DCLB. No drilling necessary.

Comments:

Very easy to install on my 2012 Toyota Tacoma. Knowing my model/year of pick-up truck, they sent clamps that utilize Toyota's 'rail/tie-down system,' along with specific instructions accordingly. So many of the other bed covers require cutting into the bed liner, which I did not want to do. The material of the cover seems very durable, and I am expecting it will last a number of years. Would definitely purchase again!

Comments:

These are a really good alternative to spending a fortune on bushwackers, fit is realty good, super simple install.

Comments:

Look nice on my 2007.5 chevy ext cab reg box

Comments:

Does the job.

Comments:

Good for price holds up so far two years with heavy snow and rain.

Comments:

Fit almost perfectly on my 2012 crew max 5.5 ft bed. The front rubber seal didn't sit flush on the front bed rail because the factory plastic bed rail covers caused the sides to sit about a quarter of an inch higher. I just made a quick trip to the hardware store and bought a strip of waterproof weather stripping for under $10 and stuck it on top of the front rail and it solved the issue. Either way it still beats paying $300 + for other brands.

Comments:

Prior to installation, I first ordered the bed railing. Since the truck had a bed liner, and with the help of a dear friend, we pull it out to make the cuts to the assigned pre-marked sections behind the liner for the side track rails, to be able to screw in the T30 torx screws provided in the track railing package. After the bed rail track is installed, make sure you position the tonneau cover side rails square (right angle) to the front rails, and follow instructions on how to attach the each side railing to the front, then loosening / re-tightening the corner screws prior to installing the clamps and get them right into the truck bed rail.

Comments:

I actually trimmed the plastic bed top covers that came on my Ram 1500 since they hang a little lower than the steel of the bad rails, This also makes it quicker to re-install since you have a point of reference for the front (and rear) clamps. I felt I need to do this to make the fit better since when I tightened before the trim, it pulled the plastic covers up.

Comments:

Awesome product. Easy to install, looks awesome.

Comments:

Wow this is nicer than name brand covers I have used in past. Ez to install with quality hardware . You won't be disappointed. Every Tiger branded item I have bought been well designed and bargained priced

Comments:

I purchased this topper for my 2007 Mitsubishi Raider. I have a 5 1/2 foot bed. This topper I was able to install myself. The directions were somewhat iffy but if you have any common sense you can figure it out. I have been using this topper for a month and love it!!!!!!

Comments:

I've updated this now that I've completed both rails.This is the first time we've done a rail install and it took us about an hour and a half for the first side. The instructions seemed confusing at first. We watched a YouTube video to get a better idea. Tyger should do some videos. The second side took about the same about of time for a total of 3 hours. Overall, I thought the install was pretty easy. Tightening the bolts and screws was what took up the majority of time.My only gripe is that all the parts and bolts and washers came in one big bag. Individual bags with some kind of labeling would have gone a long way. Originally, I took off a star for this, but the rails look so good I put it back.Doing the passenger side, the middle hole where you have to fish the bracket through was tight. I'm a girl with smaller hands and was able to fit my fingers through with the bracket to jiggle it through... so, you may need to get creative trying to get this bracket on. I read a review where the other guy used fishing line.We did some wheel blocks on the wheels and did not have to lift the vehicle. I have 2017 1500 Ram. The passenger side seemed a bit tighter than thde driver side. I did the original placing of the brackets and then the bolts while my dad held up the bar then did the final tightening.I also purchased the matching front guard. So, I'm excited to see the finished look.

Comments:

Good cover especially for the price. I give 4 stars because I never received the installation instructions. There was a checklist of things in the box which had accounted for the installation instructions. It didn't seem to difficult to install but I hope I did it correctly.

Comments:

Very good looking product

Comments:

Look good, fit great, simple install. Had them painted to match

Comments:

They arrived in a well packaged box covered in bubble wrap. It also had easy instructions to follow. Well remove 6 bolts from each side of the vehicle install rails with provided 6 bolts and washers per side. Fits My 2018 4Runner SR5 perfectly. And only took 45 minuets total to install. But I used a cordless drill with a socket attachment to speed it up the installation.

Comments:

Fits great, looks and works good, easy to install...if anyone says this is hard to install, they probably have trouble tying their shoelaces

Comments:

I bought these for my 2016 F150 XLT SuperCrew and they fit perfectly. All the hardware came with the product with easy to ready assembly instructions. Install took about an hour tops for both sides and they look like they came preinstalled from the dealer. Why pay $500.00 plus for Ford logo bars when these are just as good if not better. Fast easy shipping and the product arrived on time as promised. Perfect fit as the hardware aligned with the truck as promised. I've had the Ford nerf bars before on an old truck but these look so much better as they match the lines on the truck. Perfect color in the darker grey is a great match for my silver truck.

Comments:

Theae steps are AWESOME and cant be beat for the price! Easy intall and very sturdy. I can jump on these and have total confidence that they will hold. They bolt to the body mounts and the body. They do hang a little low (pictures) but in a lifted truck it usually wont matter. The one thing I wish they did was go to the back wheels.

Comments:

Product was just like described.Looks to be very good quality and fit like a glove

Comments:

This cover is PERFECT!!! Super easy to install too. My 2014 Dodge Ram looks even more badass. Seats really well after you leave it in the sun for an afternoon. SOME water gets in when you are putting direct jet where the cover meets the truck...so don't do like I did. Pretty much water tight.

Comments:

I love the design and the finish of this product. It is bolt on that's a huge plus. However I have one complaint the rear passenger side bracket did not fit properly and had to be notched out in order for it to properly fit up. If that bracket would of fit would be 5 stars

Comments:

Originally I had purchased this bed cover and gave it a bad review. The cover that was sent to me was short and did not extend to the end of the rails. So I could not close the cover.After contacting the company and explaining the problem, I returned the defective product and the company sent me another one. The fit was perfect.Also I must say this is a quality cover for the price. I'm a satisfied customer.

Comments:

Easy install and easy to get into if only need partially open to put items under cover. Really like the fact that is easy to remove if need the full truck bed

Comments:

Looks good and nice material and great price but I don't think it was designed for Silverado crew cab short bed. The ends (near tailgate) does not taper in like the bed of the Silverado, so it looks a bit wider at the tailgate. Also the handles that latch it to bed near the tailgate are difficult to close with the drop in bed liner that came with the truck. It is right where the pop out holes are for the tie downs and they get in the way. It would be better if the latches were a few inches down more.

Comments:

I just recently purchased my 2016 Ram 1500 and knew right away I would need some rails to help my wife and daughter with getting into the truck. I went forward with the order and was very happy with the product.They arrived on-time and had no damage due to shipping.You will see in the other reviews, but the one issue with these, is the labeling of the six brackets you bolt to the side of the truck to where the actual rail is attached. The front brackets have the tab facing the front, while the center and rear brackets need to have the tab facing the back. To accomplish this, look at the stamped letters on the brackets and on the driver side, in order of front to back, they should go DF, PF, DR. On the passenger side they should be PF, DF, PR. Essentially, use a PF as the center bracket on the driver side, and a DF as the center bracket on the passenger side. Aside from the above issue, the rails are sturdy and have no problem handling my 300lb weight getting in and out of the truck. My daughter (who is 5) loves them as she can easily get into the truck on her own now.The installation is straightforward, there are two ways to install, based on how your truck is configured. For mine, it was the easiest install option, as I had the holes already needed in the top and bottom of the brackets. Ensure you do not fully tighten the brackets, as it says to, before attaching the rail. You will most likely need to shift the brackets somewhat to line them up with the holes on the rail. Once you have everything attached, you can then tighten everything up.Last word of advice, if you live somewhere sunny, like Texas for me, do this in the shade or at least don't wear shorts. I ended up with some sun burnt knees....but it was worth it!

Comments:

Contrary to what the manufacturer says...these WILL fit on early model SR5s and Limited 4Runners. You just have to remove the rocker panel (the part with the chrome strip) if you are putting them on the 2010-2013 SR5s or any Limited. I did it on my 2011 SR5 and looks good in my opinion. There is a portion under the door that won't have a 'finished trim' piece but it does not bother me. Took 30 minutes to take both rocker panelsl off and 30 to put on both rails. Same bolt holes are used for both.

Comments:

Followed the directions and had no problem installing. The fit and finish was nice.

Comments:

This bed cover does what it said it would do. It's been through rain and wind and no leaks whatsoever. The only flaw I don't like is when it's rolled up it has a number in white print on the cover for everyone to see. I wish that it was a sticker that could be removable. The installation was easy and only took about 45 minutes because we wanted to make sure it was on correctly.

Comments:

I have had this on my 2013 Ram 1500 Express for several months now, and it has kept the bed of my truck clean and dry the whole time. I haven't had any issues with it at all. The little stick-on light that comes with it was pretty useful until it fell off and refused to stick any more. It would probably stick to a metall unlined bed better than the plastic bedliner that is in mine.

Comments:

We LOVE our new cover... it is Extremely User Friendly, and it looks SOOOO good!!! It's definitely like having the best of both worlds (open bed and having a canopy)!

Comments:

Easily installed. Bought this particular cover because it had the standard mount or mounts for the bed rail system my truck has. I have recommended this cover to several people.

Comments:

Perfect for vacation road trips! Looks and fits perfectly!!!

Comments:

Easy install keeps bed nice and dry

Comments:

Fit my truck perfectly (2018 Canyon - Extended Cab - 6ft bed). I like how tight the vinyl is. I needed to test the weather proof-ness, so I took it through a car wash. Not a drop inside the bed when finished. I feel very comfortable leaving items back there knowing they'll stay safe and dry. Very easy to install. Took roughly 15 minutes.

Comments:

I received the running boards in a very timely manner, as expected. Very clear instructions/easy to install, for any level of experience. Quality product that is performing nicely. I won't be pulling a leg muscle to get in my truck (or ripping my pants)!

Comments:

These were very easy to install and they look great on the truck.

Comments:

This product was easy to install, IF, you use the attachments provided with the type of vehicle you have. I struggled with this for close to an hour and finally looked in the bag and there it was, the attachments for my existing rail (2005,Tacoma, dbl cab). The hardest part of fitting the tonneau cover was the clamp down location. (3 slots at each location). It was just a matter of choosing the right one and then unscrewing/screwing them back together. This cover is easy to remove when you need the whole bed to transport stuff and easy to reattach after. The only drawback to this system since it is easily removed is that you must purchase a locking tailgate unless it comes standard with the truck. My 2005 did not come with a locking tailgate and I purchased one back in 2006 so I had no problems. You will not be disappointed when buying this item.

Comments:

Great product quality. Easy to blot on. Bolts on to three body/frame bolts so super secure and strong. It is a bit heavier than I would of liked as i dont want to weight down the truck but not that big of a dea.

Comments:

Great quality, great price, looks great, easy to install. I recommend to anybody looking for a inexpensive cover.

Comments:

Replaced my original 1998 snap down cover with this new one on my 1998 Ford Ranger. It went on smoothly, looks great and best of all it can be easily removed and re-installed. The old snap on cover was impossible to snap down in cold weather when the vinyl was cold. This one is a dramatic improvement. Could not be happier.

Comments:

Easy to install, it only took about 10 minutes. Quality looks to be good, only time will tell. For the price, you can beat it. I installed it on my 2017 chevy colorado z71..

Comments:

They fit well and I enjoy the look. Figure I'll answer a couple questions that I had but could find no answer too until installing them. The lower bar, or what I would consider the rock slider portion of these bars, does not extend lower than the underside of a 2018 Colorado. Eyeballing it, it is dang near exactly the same distance from the ground as the underside of the truck. Now for the portion you stand on. It extends about 1-1.5 inches past the width of the truck on each side. By this, I mean past the width of the flared fenders on a Colorado, and not the standing surface area. Looking at the truck from the front, the bars almost hide behind the front fender flare, however this is were I get the 1-1.5 inch figure past the width of the truck. I figured that they would add width but until installing the bars I could not find anyone saying how far past the sides of the truck they would extend. The weld quality seems nice, not a sub par weld job like I've seen on a few much more expensive nerf bars. Paint quality is black textured, that per the sheet of paper I got with them, they advised waxing the bars. To me this seems odd on a textured surface but sure, I'll bite. When installing the bars, they are a bit of a pain but not impossible to do by yourself. Once you get a couple bolts in, it's fairly simple. A second person would come in handy to hold one side in place while you get the first couple bolts in place. Also to level the bars when tightening the bolts, lift up or have a second person lift up on the outermost side of the bars to flex them up as you tighten bolts. This will save you a lot of time instead of going back and forth between tightening and loosening. Overall I'm pleased with the way they look on my truck, I am confident in their weight baring potential, glad they do not decrease my ground clearance, and give good surface area to stand on. Even happy with the 1-1.5 inches that extend past the truck, if a person swings a wild door open, they can just nail the bars and ware out their own car. Hope this helps anyone else considering these.

Comments:

I previously had a bully hitch guard. It was too small and people dinged my bumper around it and it rattled. This one is much bigger and I am sure will protect my bumper better and has an antirattle bracket. Super easy to install,too.

Comments:

My poor Vietnam Veteran dad and my mom struggled to get into my tacoma with the factory running boards so much so that my dad broke the plastic steps. These are stable and wide, and have already protected my truck from someone who side swiped them in a parking lot. Easy for me to install and pretty awesome looking too!

Comments:

I got this for my 2009 Dodge Dakota, Crew Cab, 5'-4' foot bed. It came fully assembled, and all I had to do was cut out my bed liner to expose the metal rails (you need to make the bed liner holes large enough to be able to accommodate adjusting the clamps). Once the clamps were adjusted properly, the top fits nice and tight, and looks very good.I Like it!

Comments:

Used for about a month now. Super tight, like a drum. Looks amazing. Fits perfect. Easy to install and use. Good quality.

Comments:

Great product. Took me a couple of hours to install. The instructions were not that great. The cover is great.

Comments:

Excellent product easy to install

Comments:

Fits really nice on the ranger and is made really nicely and strong.

Comments:

Well my review is like others. They look nice, they're pretty solid and not too flimsy. Fit my ram 2500 perfectly. All around a great product and very reasonably priced. The decorative nuts and seal that had to be assembled took longer than the actual install process.I had mud flaps on so those and the factory plastic trim on bottom of the fenders had to come off which added to my install process.I put on 20 inch rims with 35s or 34s so I heard the rocks flinging up on the side of my truck. I was apprehensive about flares because they can be tacky but I'd rather not chip all my paint up on my truck so I ducked it up and made the order.Besides all that I am happy with the product and would recommend it.Hope this helps.

Comments:

very easy to install. very high quality at a great price. put on a 2006 chevy colorado.

Comments:

Everything was great except the tail gate. Big gap where rain could get in. I fixed it by adding a thick insulation strip. They should provide that. Easy to install. I would recommend it.

Comments:

Easy to install on my 2015 F-150 Crew cab. Comes fully assembled. Seems to fit snugly. Looks great. Easy to fold and unfold. Very pleased so far.

Comments:

I bought these for my 2015 GMC Sierra 1500 and they're amazing. I am disabled and it was hard getting up in the truck- I would have to pick my leg up and put it in. These are such a huge life saver. They're sleek and look awesome with the truck. My husband and I like the fact that they are the flat gray as we have looked at other side steps on trucks and they don't look as classy as these and are either chrome or a shiny black. To us, it looks too flashy but these make the truck look really sleek and classy. Its always been our dream to have this truck and this is just a wonderful addition to our vehicle. We also like the fact that there are 3 bracket holders on each of the side steps where as most others we have seen are only on either end of the step. I think this is great because you have support in the middle of the step to prevent from future bowing down the line. We are completely satisfied with this purchase and would recommend to anyone. Thanks TYGER Auto!

Comments:

So far so good, i noticed it does leak a little in the corners of the bed, however does a decent job for the price and looks great for the quality

Comments:

Great cover, high quality and easy to install. Instructions and video are very good.

Comments:

Just installed these, they were pretty easy to install. They look great on my 2018 Toyota 4Runner and seem to be quality!

Comments:

This was a perfect fit for my '18 Tacoma; easy installation in about 30 min. I've bought Tyger step rails the first time and this Tyger product exceeded all my expectations! Will definitely choose Tyger aftermarket products in the future.

Comments:

I've had this for about two months and am very happy with it. It fits nice a tight but not having a 'stretched' look. I believe I'm even getting better gas mileage with it, about 10-15 miles per tank. Installed in about 30 minutes or so....may have gone faster but my wife helped. :-)

Comments:

I love the fender flares. Great quality and price. I had to have mine paint matched. Pricy but worth it

Comments:

Steps look great and the instructions were awesome even had pictures which was appreciated, but not needed as the instructions were very easy to follow.

Comments:

We purchased this cover for our 2007 Toyota Tundra. It was easy to install and looks great! Very happy with the purchase.

Comments:

I bought a brand new truck and had a scheduled Road Trip shortly after, so I needed something to cover the bed. I was not prepared to buy one of the expensive covers yet, so I gave this one a try.It does a great job keeping the Bed Dry and it covers the bed well enough to keep luggage out of sight etc., The fabric is a little bouncy while driving, but that's OK..It isn't going to be able to hold more than a light snow, so I will need to take it off or replace it in the Winter, but for the price it does a great job if you need a cover in a pinch or don't want to buy a more secure cover.

Comments:

Very good product.. for $160 its pretty cheat. The dealer charging me $800. Its easy to install just follow the instructions..

Comments:

Works great, a bit noisy with the back window open from the fabric moving around. It came with the tailgate seal, due to the protector on my tailgate I used the seal by the cab and it works awesome!

Comments:

fits my truck, relatively low profile. great product for the money

Comments:

Drivers side front flare was twisted just a bit but honestly that may have helped it have a tighter fit against the fender, pass front had a teeny tiny scuff smaller than a dime so I don't even care, can't see it unless you look extremely close so no one but me will ever notice. Not bad, I'd compare them to sets that cost twice as much. They are larger than the description though, would prefer them not to stick out so far but still a much needed improvement on my old truck.

Comments:

Excellent, great buy

Comments:

Over half the price of bushwakers yet same look and quality. Would buy these again and have recommend this brand to everyone i know looking.

Comments:

So far its been everything I thought it would be, looks nice, keeps a water tight seal. But when driving , the surface of it ripples a little, making you think that it may fly off at any moment. As well, it doesn't seem to be square. As it sits on the truck rails, it seems the tail gate end is smaller than the end at the cab. Is this normal? This truck has never been wrecked, so I know its not the truck bed.

Comments:

Excellent set of steps well built!

Comments:

Easy to install on 2004 Nissan Titan, 6.5 feet box, looks good, covers well, no water inside the box.

Comments:

this the second cover ive bought. love it. and there were upgrades that made it even better.

Comments:

The rails are nice and look great on my truck.

Comments:

Great product, easy 15 minute installation and could not be happier. Helps with gas mileage and keeping my items dry!

Comments:

I love the look of these flares on my truck, but they were a little frustrating and time consuming to install.

Comments:

All the previous reviews are correct. It was VERY easy to install. Directions were accurate and I like the plastic protection item - small part but can save a lot down the road. Nice looking. I wanted flat style since I had the round style on my previous F150. You only need on 13mm socket with ratchet. Packed well and on time. THANKS!!

Comments:

Good product for the price. Installation with provided hardware was simple and fit fine in 1 to 2 hours. Fenders scuff easy though so if you don't want any marks need to be careful while installing edge trim and torx bolts (i.e., fake rivets). I scuffed one sliding on cardboard installing trim. Hell yeah!

Comments:

Perfect fit for my 2017 Titan. Love the look and they are heavy duty. I had no issues mounting them as some have said. They mount to the body and not the frame as some questions and answers stated but still very happy with this purchase and would purchase again. Similar products are much more $. Can't go wrong. Took me about an hour by myself.

Comments:

Great quality I was impressed easy to install great packaging and instructions. Fits perfect and looks great.

Comments:

Fits 2018 Chevy Silverado 1500 perfectly

Comments:

I just purchased a new 2018 Silverado, I'm sure I will rarely put anything large in the bed, so I wanted to put a cover over the top for small things such as groceries etc. Very easy to install, and good quality. It has rained about 6 inches in the last couple of weeks and I don't see where it leaked any. I'm very happy with this product.

Comments:

Just got this a couple weeks ago. So far I love it. Durable, well manufactured, a cinch to install. Looks great on my 01 Ranger. The led light is a nice bonus

Comments:

I bought this bumper step for my 2014 Honda CR-V. The hitch receiver is by Curt. Installation was easy. All I needed was my husband's 11/16' wrench to tighten the anti-rattle U-bolt. The bumper step is now secure and doesn't rattle. The included lock is a nice addition.I bought this for three reasons. 1) As a bumper step to better wash my rear hood area. 2) As a step up into the rear for my older dogs. 3) As a tailgate deterrent. If someone rear-ends me, he will bear the brunt of the impact because this bumper step is solid steel.This bumper step arrived in less than 48 hours from ordering. It arrived well packaged, with styrofoam around the angles, and the main step wrapped in multiple layers of bubblewrap. All said, this is a 5-star product.This does NOT affect my rear sensor.I have two minor complaints about this bumper step, though. The top really needs to have an anti-skid surface on it.

Comments:

Looks great. Easy to install. Seems to be a tight fit. Just got back from a 4 day trip down the Oregon Coast and the cover held up well. We encountered plenty of rain and our stuff stayed dry. We saw at least three other Tundras will the same cover and they all looked great. I would highly recommend this product. Excellent quality and great price.

Comments:

its a heavy duty running board i like the quality and packaging of it. fits perfectly to my 4runner 2016 and its so easy to install. highly recommended

Comments:

I purchased this product to install on my new Tundra. So far, I love it. It was easy to install and so far, I have had absolutely no rain get into the bed of my truck. I am in Florida where we have very sudden and extremely heavy down pours. I can open and close my tail gate without having to open the top. I had previously purchased a TRUXEDO LO-PRO for my last truck (Silverado) I always had water getting into my bed and had to open the top when closing the bed and then close the top. This Tyger was half the price and so far I have no real complaints. My only negative is, Yes, it does come with the mounting hardware for the 'Load Management System' and they were factory installed on my truck. There are three clamps on each rail for the Tyger top. I only have limited movement for the anchors of the system due to a mounting bracket in the middle of both sides. I am NOT disappointed so far by any means and I definitely would recommend this top to anyone.

Comments:

After reading all the reviews, I was a little skeptical about the leaking front but this cover has a large seal for the front and above the tailgate. No extra weather stripping needed. Love the easy removal rear clips. Bought the locking tailgate from Pop & Lock so someone can't just open the tailgate and take the cover.

Comments:

This was an awesome investment! We ha dad to pick up family from Maine and we drove all the way to Texas with thier luggage and moving boxes in the back of the truck under this cover and had no issues at all, it was weather tight through rain, wind and snow. I would highly recommend this to anyone who is looking for a reasonably priced truck bed cover.

Comments:

Purchased this to replace an extang full-tilt tonneau that was destroyed when my truck was towed. I am a home inspector by trade and carry lots of stuff in the bed of my truck, so protection from the elements and functionality are important. Initially I was skeptical about this cover, but once it arrived and I installed it I feel better about it. The build quality feels sturdy and well made with quality materials. The installation couldn't have been easier on my 2006 GMC Sierra, taking only about 15 minutes. Included with the cover are a storage bag to protect the cover when you take it off, and an LED bed light, which feels a little cheap and gimmicky but whatever. Time will be the ultimate judge of how well this cover holds up, but given the apparent build quality I don't think it'll have any problems.

Comments:

I got my bed cover yesterday. Took me a little bit to get it on and where I wanted it, mainly because I installed my utilitrack rails on upside down at first.. But other than that it looks nice, clean and fits very well. I had to adjust the cover once or twice because my tailgate kept catching the cover.. Idk why. By it does not appear to have any gaps for water to get in to the bed but we will see over time.

Comments:

Fit perfectly, installation instructions were not the clearest but its simple enough that you can figure it out.installed in about 15 minutes, packaged nicely and everything was accounted for. priced much lower then others but the quality is great, i had a foldable tonneau on a previous truck and paid around $300 for it. it was nice but i like the fact that this one will roll up almost completely flat when needed and the material seems as good or better than my previous foldable one, it is also very tight fit which makes it very sleek looking just like in the advertisement photos.

Comments:

First roll cover I've used and very happy with the product. Easy to install and highly functional. My one 'negative' observation (and why I would have gone with 4.5 stars if I could) is the condensation that forms under the cover during wet weather -- rain and ice. Perhaps that's a thing with these covers, so I couldn't fault the company if it is. After our cross-country trip, I have continued to run it in town with all this SoCal rain - very unusual for the area - and it's keeping the bed dry. Other than that, I have no complaints.

Comments:

They fit great on my 2016 Ram just had to take one of the passenger support bracket and put it on the driver side for the rear support holes other then that they look great and are sturdy

Comments:

Fit was great, and super easy to install. Must have

Comments:

Have had the cover on the truck thru Arizona summer and monsoons. Still holding up like a champ and looks good. Did need to fix the gaps between the tailgate and up front to avoid excess water inside bed.

Comments:

I honestly like this tonneau cover, it came neatly packaged, and it was pretty easily installed. It looks like it will last, plus it's got a ten year warranty.It didn't fit my 06 Colorado exactly because the back of the bed flares in a little, but it's not really that noticeable. Besides, for the price you can't beat it. I would recommend this.

Comments:

I have had this going on 3 years now and this has been fantastic. Bed has never gotten wet. Seals keep it perfectly dry. Has been through all kinds of weather and has performed perfectly. What sold me though was Tyger's warranty and their team's response to a problem I had. One of the clamps by the tailgate bent and I couldn't close the cover. They got me a new one, no charge, right away. I will be purchasing more from them in the future.

Comments:

I've had this cover on my Silverado for about a year now and it is still fantastic!. It has never leaked even when traveling on the interstate through heavy downpours. It has handled 10 inches of snow without bending, buckling, or sagging. I did add a locking tailgate so neither it nor the bed contents could be easily stolen because there is no way to lock the cover. It has not faded one bit in the sun either. Good value, good cover. You won't be disappointed. As far as gas mileage goes, although I'm not a fanatic about calculating my mileage on a consistent basis, my '04, V8, extended cab, Silverado recently got 19.9 on the interstate with this cover in place; not bad for an old gal and that's an almost 3 MPG improvement.

Comments:

These turned out awesome! I love the shape of them. I was leery at first of the rocker mount vs frame mount. I've only ever bought frame mount steps, so this was a leap. These these are sturdy as all heck and my worries are long gone.My truck had the factory step option so most of the riv-nuts were already installed. Heed what others have said and run a thread tap/cleaner thru the holes first if you have them pre-installed like mine. It REALLY makes a difference. The other main thing that drew me to these were the covers for the brackets. They are just cheapy covers, but they hide the rather skinny looking brackets and make a huge difference. I had the same style brackets on my silverado and it's just doesnt look right having those anemic brackets on a beefy looking truck! They do also come in color coded bags to distinguish right from left. One of mine was mispackaged and took a minute to figure out. Overall, the quality and looks are great! These are a great deal for the price, get em and save hundreds!

Comments:

Just installed! It's cold out so shuts a little tight (30 degrees) but easy to put on & I like the clamps provided to install in the tie down rail!

Comments:

Looks good and works well. Super easy install. This fit my 2013 f150 with the 5.5ft bed great. One thing I would suggest, there's an extra piece of weather stripping, mine was crammed into the very bottom of the bag and I didn't find it until after the install, use this for the front roll up piece at the top of the bed, it makes a better seal than just the one that's already adhered.

Comments:

These fit and look great. Dont need to pay more money for the other brands. You get better at it as you go but still a pain. I get the reason for not having it on already is in case you want to paint them. Two versions, one preinstalled and one not for people who want to paint them.

Comments:

I waited a year to write a review so I had time to evaluate the steps. They are great and just as easy to install as others had said. I put them on myself in about 2 hours. That was me separating all the parts/reading instructions and locating the attachment points and cleaning them of debris. There are no issues with color fade ( I thought for the price there might be since they are way less expensive than some of the others.) or durability. I would buy another pair for another truck with out hesitation happily. We also live in a area of heavy snow and drive on roads treated with salt/de-icer. The steps show to pitting or defect.

Comments:

Perfect fit on my 2016 Toyota Tundra extended cab short bed. 6.5 feet. Metal clips slide into the track. The cover latches securely to them. Easy on, easy off. Will it stand up to snow load ? I don't know yet. A carrying case and a bed lamp are included. I like how it latches in the fold up position. Great for loading cargo or lumber quickly without taking it off completely. I have not seen any increase in MPG. It has kept leaves and rain out though. Low profile makes it look like it belongs on my truck.

Comments:

This is nice I was a little disappointed because I was under the impression it locks but it does not lock with a key it locks into place which is good .. but it does not lock so someone could easily still get into the truck bed.. other than that it is worth the price and keeps water out!

Comments:

I purchased this cover for my 2002 Silverado a few months ago and am very pleased with it so far. The quality seems very good and it was very easy to install. I was getting rain in the bed from under the front of the cover, but I installed the included weather stripping on the bed's front rail and that solved the problem.

Comments:

Super easy to install took less than 2 hours. Fit was perfect for 2014 2500 Ram 4x4. Great value truck looks great.

Comments:

These are as good if not better then bushwhacker. They are simple install and fit great! Really helps with having oversized tires by keeping rocks from being thrown up the side of your truck. I would buy again in a heartbeat! Little tough getting them to Alaska, wish they offered a shipping option for up here but with the help of a friend state side I made it work.

Comments:

2012 titan pro 4 x they Bolt right up no drilling or anything just spayed the studs and the threaded holes for the bolts with liquid wrench ,easy as that .

Comments:

I installed this cover in about 1/2 hour taking my time. As in previous reviews I purchased expandable weather foam tape to place over the bulkhead of the bed. Once that was done I installed the cover. It looks great. I do notice a little bit of a gap near the tail gate where some water may seep in. But for the money this appears to be a great cover.

Comments:

This cover is great! Quality material and simple design. Easy to install, if you have no bed liner. With a bedliner, you'll need to make some cuts in the liner to install. I have a 2006 Dodge Dakota Quad Cab with 64.9' bed. It fits perfectly!

Comments:

I am very satisfied with the quality of this cover. I was able to install it in 15 minutes and the fit was perfect.

Comments:

Good cover for the price, no question there. However, with a small amount of snow cover (minimal weight) it seems to stretch the material fairly easily. It creates noticeable waves when driving but seems to tighten up a bit a day or two after it's cleared off. I'd purchase again if I ever needed another one.

Comments:

We purchased a new truck this fall and needed side steps. Our last truck was outfitted with a set of Tyger Auto Chrome side steps and I was impressed by how easy it was to install that set, so I searched Tyger Auto for a black set for our new truck. This set mounted easily without any modifications to either the truck or the side steps. I would purchase again.

Comments:

High quality at a great price! Actually came with real nuts and bolts!

Comments:

For the price I love the tri-fold cover, it's easy to install, looks great, easy to use. I wish I'd bought it a couple years sooner.

Comments:

Fits perfectly on my 2016 GMC Canyon. Strong, lightweight and appears very durable at a great price.

Comments:

Perfect fit and easy installation on my 2016 GMC Canyon with the short bed.The vinyl is light, but looks very durable.

Comments:

Looks really good and fits nice. Don't think I will need the additional weather stripping but time will tell. Instructions were useless if your Tacoma has the rail system in the bed. A little patience and common sense and it's an easy installation by sliding the included hardware inside your rails.

Comments:

Installation is very easy.Would help if foam on track was a bit thicker. Had add foam at back so the tarp would latch.Overall, very nice appearance and functionality!

Comments:

Great cover, definitely should've got the one that flips up one more time to open the bed more. It's a little large when folded up but learned to deal it it. Would buy again.

Comments:

I waited a while before I wrote this review. First, installation was as easy as advertised. Took 2 people about 30 minutes because I wanted it to be perfectly square on the bed. I have been through a drive thru car wash about a dozen times and there have been no leaks. The top has stayed tight and it has very little movement during highway speeds. I would highly recommend this to any one looking to have a low cost cover for their bed.I gave it 5 stars because I could not give it 6 stars.

Comments:

Good quality for the price and installed easily. The only negative is if your box has the plastic rail caps it leaves a gap on the front of the box. Get some weather stripping and combine it with the supplied weather stripping and problem solved. Not the companies fault just a heads up.

Comments:

Nice fit. Easy to install & use.

Comments:

Like- was surprised how water proof it was in a big storm we had!

Comments:

easy to install, works as advetised

Comments:

Quick delivery and easy install. Very impressed with the ease of installation. The equipment seems to work as it should. The magnetic LED light was a bonus and it works good.

Comments:

love it

Comments:

I don't usually leave reviews, but this is one I felt inclined to. These running boards are the best. The install on these are so easy, any easier and they would self install. I just had neck surgery, so I wasn't able to climb under my 2016 Toyota Tacoma Crew Cab to put these on. I had my teenage son do the install for me, while I read the install instructions along the way. The install took about 30 minutes. The parts come in 2 colored bags, green for one side and clear for the other. So easy. These look great on my truck. They are much cheaper that what the dealer wanted and also less than others on other auto parts websites. I would buy these again in a heartbeat.

Comments:

Fits perfectly, only took ten minutes to install. Tight as a drum and looks very nice!

Comments:

Extremely pleased with this product. Exceptional value for a fair price.

Comments:

Fast delivery. Fits great.

Comments:

So the giant box arrives which is always a good sign that very little assembly will be required. Nicely protected inside with foam and cardboard. Threw out the instructions, took off my utility rail tie downs and set it on top the bed up by the cab. I slid the aluminum rail adapters in the rail and they fit perfectly. I unfolded the cover and began eyeing it for alighment. The front needed the foam strip as expected and it was positioned for securing. No issues, took maybe 1/2 hour to install, could be removed in 5 minutes. The good: price, quality, ease of install, seal, performance in wind. The meh: fit, my 09 Tacoma has tapered bed sides, bowed out in the middle and the tonneau is straight. This may bother some anal retentive types. If you have linear symmetry issues, you need to spend another $500. The bad: none, I like it.

Comments:

Step bars even better than advertised. These bars have supports that run back to the cab mounts. Very easy install and very sturdy.

Comments:

Works great and fits perfectly. Bought it mainly to keep snow out but now I use it year round. The front clamps were tight on my 2013 Silverado with bed liner but I ground the slots a little bigger. Goes on and comes off easily. I know people who paid $600 or more from dealers and this is as good.

Comments:

Bought these for my! son for his truck and they were easy to but on. Good quality for the price and they arrived on time.

Comments:

It went on my 06 fx4 f150 very quick and hassle free, I am only giving 4 star for now since I just put it on today. It only looks a little off because my bed rail widens at the front. I was sceptical as Tyger said it would not fit my model of truck, but it seems to fit nicely except 2 spots in the front corners where my liner has gaps, which a little strip of sealant will close off, but it started raining on me so when it stops I will see. So far happy with purchase.

Comments:

Fits good. The clamp system is not that good though. I will have to come up with something different to hold the unit later on.Looks good and it's easy to install.

Comments:

Good looking fender flares. Once painted they were easy to install.

Comments:

I have owned more expensive rollup and hard flip up covers ($$$) for previous trucks. I decided to give this cover a try based on a friend's recommendation. I was a little skeptical because of the low cost but I was pleasantly surprised at the quality. I don't really need a cover for 'security' and this is really more to keep stuff out of the rain and keep the honest people honest. Installation took about 15 minutes to git it squared up just right and I only used weather stripping on the front of the bed. Will see how well it holds up in the hot Florida sun. My truck is parked outside so my only concern is longevity of the material. That said, other reviews have been positive in that department so if I get 1 - 2 years out of it without it fading, I would be happy.

Comments:

Inexpensive but good quality. Soft trim a little difficult to install but after first one the rest were a breeze. Physical install on truck was 20 minutes and easy. They look great and no more water splash and dirt on side of truck, best of all!!!

Comments:

Nice solid feel to this product, not cheap plastic. Doesn't have a rubber gasket like the others I've seen.

Comments:

This cover has been through 2 winters so far. I can't fit my truck in the garage so this cover see all sorts of weather and snow build up. I have to say, I love this cover and WHEN it eventually rips or falls apart or whatever, I will buy another one. It absolutely keeps my bed dry and still looks and performs like new. It comes off quick and easy when I need the whole bed and goes right back on in less than 2 minutes. Great design. My only complaint is..... I just wish it was a little wider so that it was flush with the bed on the sides. I just think it would look better. The advertising pics were a little deceptive. BUT, I love it. I didn't want to spend a bunch of money on a hard cover. I didn't want a one piece floppy cover with Velcro that doesn't last. This thing installed in 5 minutes. It really was easy. It's made well. It has little snap fittings built in to secure it while folded up if you're hauling something. It keeps the bed dry during rainstorms ( even down the highway). It came with extra weatherstripping if you need it ( I didn't ). The 4 hold downs that secure to the bed are plastic handled but you don't need to really crank on them to secure the top to the bed. Some people complained that they broke. They may have had them way too tight. Are they heavy duty? No, but they work fine and are designed well enough. The cover looks good going down the highway too with minimal movement or ripples in the vinyl.

Comments:

This product was to install after reading the instructions and watching the video a couple of times. The cover rolls flawlessly and I did not have to adjust the locking caps since the tension was fairly accurate out of the box.The ONLY complaint that I have is that there is no disclaimer at the beginning of the instructions regarding the use of the weather strip. I finally installed the product and had it even on both side rails only to find that there is a gap in the front area. After careful consideration, I abstained from using the weather stripping since it's too thick and could possibly negatively affect the alignment of the side rails.I have a 2014 F150 with a Dualliner bed liner. It seems that the top of the front piece is not as thick as the Ford factory plastic bed liner. This product would receive 5 stars if not for placing the disclaimer of the weather strip at the beginning of the instructions. There is no greater stressor than thinking you have successfully installed a product only to find that you need to consider one step before even starting the installation.

Comments:

great cover for the price, installation was straight forward and took under 1 hour from start to finish. not to mention it looks great once installed

Comments:

Great product at a fraction of the dealership price

Comments:

Excellent quality and great price. My husband was a little worried at the price point quality wise on Thai. However we have had a few weeks now and it is not only great quality it gives your truck a clean sleek feel.