TYGER FURY Short Stubby Front Bumper Fit 07-18 Wrangler JK; 18-25 JL; 20-25 Gladiator TG-BP6J70078
$299.00
Fitment
Features
Customers Also Bought
Installation
Warranty
Shipping
Reviews (11)
★★★★★
Fitment
Features
Customers Also Bought
Installation
Warranty
Shipping
Reviews (11)
★★★★★
FITMENT
FEATURES
TYGER AUTO focus on developing premium aftermarket auto parts that meet or exceed OE quality standards. All TYGER parts are covered with No-Hassle warranty and will make your vehicle stand out on the road!
- IMPORTANT: Vehicle-specific design to be compatible with 2007-2018 Jeep Wrangler JK; 2018-2025 Jeep Wrangler JL; 2020-2025 Jeep Gladiator JT | Not Compatible for Rubicon Trim | Fits factory fog lights. Warning: Factory splash guard and skid plate will be removed during installation and cannot be reinstalled.
- TYGER FURY bumper is made of heavy duty 5mm carbon steel with powder coated black textured finish for extreme protection and rust resistant.
- Comes with integrated winch plate, welded D-Ring mounts, license plate bracket and hardware to reinstall factory fog lights.
- Easy Bolt-On installation. No drilling required. (DIY instruction included in the package.)
- BACKED BY TYGER - TYGER backs this product for 5 year for US customers against manufacturing defects!
Customers Also Bought
INSTALLATION
Installation.pdf
SHIPPING INFO
Weight: 71 lbs
Package Dimensions: W18.1xH13.4xL49.2
Free shipping to 48 states. Extra shipping for HI, AK and PR. The extra shipping will be applied during check out process
California Residents: Prop 65 Warning
WARNING: Cancer and Reproductive Harm
Visit: www.p65warnings.ca.gov
VIDEOS
CUSTOMER REVIEWS
Total Reviews (11)
Reviewed by: Chad Mills
Purchased from: Tyger Auto
Purchased from: Tyger Auto
(Brea, CA) January 11th, 2025
Review Image: 0
Comments:
I�ve recently purchased a 2024 Jeep Gladiator and wanted to get rid of the plastic front bumper. I�m not new to jeeps. I�ve been building and modifying jeeps for over 30 years. This current gladiator is getting modified as well just not to the extreme like most I�ve done. With that being said I wanted to find a bumper that was under $300 but built well. I searched a lot and there are only a hand full of bumpers out there in this price range. I read a lot of reviews on forums and every where else I could dig something up about this bumper and everyone had great reviews. So I figured I�d try it. I�m glad I did! It was packed great and shippped quick. This bumper is well built at just over 3/16 inch thick steel and the welds are good. Assembly was easy and the directions were spot on. I highly recommend this bumper. You will not beat the price point. Great form, fit and function!!
Reviewed by: BigScotsman
Purchased from: Tyger Auto
Purchased from: Tyger Auto
(San Jose, CA) July 18th, 2023
Review Image: 0
Comments:
Looks great, solid bumper!
Reviewed by: Tony Atila
Purchased from: Tyger Auto
Purchased from: Tyger Auto
(Aquia Harbour, VA) August 13th, 2024
Review Image: 0
Comments:
Amazing
Reviewed by: Andi
Purchased from: Tyger Auto
Purchased from: Tyger Auto
(Hudson, NY) August 31st, 2024
Review Image: 0
Comments:
Love this new bumper. It looks amazing and was easy to install. The only part that was a little tricky were all the little screws for the fog light mounts. After that, intall was easy!
Reviewed by: Chris Plumb
Purchased from: Tyger Auto
Purchased from: Tyger Auto
(Brownsville, TX) September 5th, 2023
Review Image: 0
Comments:
Good product. Nice fit
Reviewed by: Brad Bishop
Purchased from: Tyger Auto
Purchased from: Tyger Auto
(New York, NY) October 11th, 2023
Review Image: 0
Comments:
It looks very good. I have not installed it yet.
Reviewed by: James Adian
Purchased from: Tyger Auto
Purchased from: Tyger Auto
(New York, NY) October 13th, 2023
Review Image: 0
Comments:
The bumper is a good price and very well built. It was also very easy to install but does require a good friend to help steady it until you get all nuts and bolts started.
Reviewed by: Jack S.
Purchased from: Tyger Auto
Purchased from: Tyger Auto
(Santa Rosa Beach, Florida) March 2nd, 2022
Review Image:
Comments:
(Tyger product, purchased on Amazon) After being very impressed with Tyger’s vented steel fenders for my Jeep JK8, I bought this stubby bumper. Once again, I am thoroughly impressed. The finish is immaculate with no thin spots or distortions (something I liked about their fenders). The welds are solid, and yet smooth and undistinguishable. The recessed winch plate was perfect for my 13.5k winch and I love the tabs on the bar for attaching my light bar. The stubby width is perfect, protecting what needs protecting while not interfering with my tires for an approach when off-roading! Wish I could attach a picture. It looks great, and I get asked about it a lot. Oh, the Tyger logo looks laser cut into the bumper and I attached rock lights on the backside so it really looks good lit up at night!
Reviewed by: Michael Chapman
Purchased from: Tyger Auto
Purchased from: Tyger Auto
(Randleman, NC) January 9th, 2022
Review Image:
Comments:
I bought mine off of Amazon but sold by Tyger. Excellent bumper for the price. The powder coat is well applied and thick. No light spots at all. Welds are done very evenly and look sunk well. Fit was right on and no cutting or adjustment had to be made to my 2021 Overland Gladiator. Nice thick steel and the winch plate is welded strong and plating is thick to support a heavy duty winch. Very pleased with my purchase.
Reviewed by: Vincenzo
Purchased from: Tyger Auto
Purchased from: Tyger Auto
(New Jersey) December 12th, 2021
Review Image:
Comments:
I got the bumper from dealer not direct I wanted to let them know that item looks really nice heavy built not Super easy to get it in but not impossible hope it holds against weather
Reviewed by: Adam
Purchased from: Tyger Auto
Purchased from: Tyger Auto
(GA) January 25th, 2021
Review Image:
Comments:
1st impression: great packaging. The bumper shipped quickly. Installation was easy. I added a winch at installation, and I used it within days. The bumper does it's job!